Seriously OT: Whoring Galore here in Part 4!

no weekends for me... I rulz joo
t
I im waistd. But I won a game of bowling

Off to piss posts I go

love not working weekends :)

yeah, that's my standard week, actually... OT is nothng I'm unfamiliar with.. maybe not 60 hours each week, but 45-50 normally, and weekends always off... then there's other places, where I've put in 84 in a week... that's always fun too. 4 hours of it has to be dbl time legally :D

Unfortunately, no time to spend it when you do that tho...

damn i work about 12 hours everyday, sunday - thursday.

i work overtime when needed...

I get no credit for OT

if the military got paid by the hour. damn i wold be able to afford a ton of shit.

Poverty level for the northeastern part of the US has been increased for a single income, 3 person family... it's now the approximation of $13/hr. That would put just about everyone in my place of employment below pov. Including me.

damn inflation

What is that, like 22-27k/year, something like that...

And that's just to live "normally".. still watching bills, rounding all your trips into one, etc.. that's not including extra stuff, like after-school activities for the kids, going out to eat once in awhile, somewhere other than denny's... ya know.. that stuff we all love to do, but can't afford.

In the course of 310 days, I have worked 2,699 hours of overtime.

holy shit... nothing else to say there... just
"holy shit."

i wanna say my base pay is like 1600, so x 12 months, is 19,200. then 150 extra a month for my orders= 21000, plus food allowance= 24300, then after all the taxes, through the year, comes out to not shit. after the bills i usaully have 100 after everycheck, but i use that for gas, and smokes

I make 9.50/hr... I usually get about 310 a week after taxes, and that gives me enough money to cover the bills, and have about $20 a week... after gas and all... I have 0 dependants on my W4 though, so I get more taxes taken out... I'll re-file that part this year and claim 1 for my wife, so I have less taxes taken out, I just won't get as much of a refund at the end of the year.

i've got to get another car...the Land Cruiser usually runs me about $70-$80 a week in gas :( that's like 4 weeks in the Cavalier

had our christmas party last night at Charlie Goodnights Comedy Club...was very cool, my first time at a comedy club

I'm only getting about 23-24 mpg average from my Civic

that means I spend about $35 a week in gas @ $3.21/gallon ($3.209/gallon... damn 9/10)

it's pretty rediculous, actually, when the civic SHOULD be getting around 35-40 avg.

Here are some of the problems I'm facing right now: Gear ratios too high for torque/hp ranges, Cam/ignition timing is still off (changing back to B2 cam)... car still doesn't have the right throttle response... but that means cleaning sensors and such, and it's still much too cold out for that... and I need to change plugs/oil/wires etc.. and O2 sensor (still).

The solution for the gear ratios not lining up w/ the engine ranges will be solved when I build the D16A1 this spring.

Basically, I expect the engine to make peak tq @ less than 2400 RPM and peak HP at around 4500-5k, with a relatively flat torque curve, as the CRX HF (B6 engine) had (89 TQ @ 2100 RPM iirc) but I expect it to be ALOT higher than the HF was.

Well im the proud owner of rear disc brakes. Granted, they are not on the car yet and wont be till I get wheels that will actually fit over them, it will give me a chance to replace ALL of the bushings and rebuild the brakes themselves. Tomorrow Im going junkyarding for some DA knuckles so I can use my new axle that I got. And Ill have even bigger brakes up front. Damn tiny std hubs.

haha.. get 'em mounted, then you'll have something to brag about... lol

I have rear disc brakes too.. (not for my car) but they're hanging on the wall in my old bedroom at my dad's house, next to the other crank for my B2 engine, the cams for my other ZC engine, and a few random assorted parts.

Well, they ARE in my car...they are in the back seat lol, the whole RTA assembly , with control arms and all.

ha nice place for it... do yourself a favor, and make sure you clean shit up before you put everything in. I hate nothing more than a kid who puts parts on his car, and doesn't even bother to clean them up first...

but since you're replacing bushings and such, I guess you'll have to anyway.

did you get that energy bushing kit?

Ive got the engine mount inserts. Im still looking for a reasonably priced kit, but it looks like ill end up buying one for 100 from a guy locally. Tomorrow I go to pull the crx dash and possibly pick up the koni shocks.

And trust me, they will be fully disassembled and cleaned, resurfaced or replaced, painted and reassembled.

teg rotors are cheap.. don't resurface... I was going to get the rotors and pads, and a caliper rebuild kit from a parts store, and buy the rest froma junkyard or "yard sale"

You got a aim or yahoo?

Aye I do. But these are crx rears.

ninesecondkilla - aim
darkness.suspended - yahoo

CRX rotors are cheap too :P

Sho’Nuff: Am I the meanest?
Gang: Sho’Nuff!
Sho’Nuff: Am I the prettiest?
Gang: Sho’Nuff!
Sho’Nuff: Am I the baddest mo-fo, low-down, around this town?
Gang: Sho’Nuff!
Sho’Nuff: Well, who am I?
Gang: Sho’Nuff!
Sho’Nuff: Who am I?
Gang: Sho’Nuff!
Sho’Nuff: I can’t hear you!
Gang: Sho’Nuff!
Sho’Nuff: The Shogun of Harlem!

http://www.badmovies.org/movies/lastdragon/lastdragon3.jpg

mmk... I'm guessing that's just one of those things that just "had to be done"... correct? lol

yeah, thats Adrian in the back, with Matt behind the Coolio look alike and TSC on the far right

lol, I'm sure that's from a movie I've seen... or something, I seem to remember something like that from back in the early 90's, when I was much too young to actually be watching that kinda stuff :P

just got done watching the movie on my pda at work

and i think it's from '85...The Last Dragon

Iono, I don't remember it all that well..

That movie is awesome. I like how his special outfit has a fried egg on each shoulder haha

Bruce Leroy ownz

So neither of my windshield washer nozzles sprays anymore. Anybody know any crazy solutions I might try short of buying new nozzles?

I already took the whole system apart and checked for clogged tubes

Did you try sticking a pin in each hole? Did the motor stop working?

I tried pins a while ago when just the pass. side stopped spraying but that got me nothing. I removed one of the sections of tubing to give a shorter path to the pass side and that didn't really work.

Maybe it is the motor. I hope it isn't but thats really the only possible explanation other than clogged nozzles. However, when the drivers side was still working (this weekend) it was a strong spray but the pass. side got absolutely 0 :dunno:

Or maybe the lines are frozen, though you said you checked the lines. Did you check the lower line(s)? I'm not sure how the Accords are, but in my car, I can hear the motor running when I pull back on the lever.

have you tried replacing the sprayers yet?

If you don't wanna do that, hook a air line to the "nipple" on the sprayer, and pump about 20 PSI through it, just make sure you have something in front of the thing to catch the aerators when they blow out (They just press back in).

If that doesn't work, it may be the pump, but if you hear it running, then it's working... check the lines for frozen crap.. never hurts to check again.

this is fucking hilarious. (http://kalecoauto.com/index.php?main_page=index)

browse around the site a lil, you will see what i mean.

buddy of mine used a bottle of windex until he got his fixed.....

I used to put 20% windex in my washer tank.. helps to keep the bug guts off the windshield in the summer.

Then I switched to industrial cleaner, which apparently had too much alcohol in it, b/c it destroyed the seals in the washer pump... SOOOOO... I replaced the washer pump, and started using windex again...

Today the drivers side nozzle came to life again in full force, but pass side is still dead. I'm stumped. I'm gonna flip flop the nozzles tomorrow and see what happens. I'm actually hoping the same nozzle continues to not work so that way I know I can just buy a new one and be done with it.

haha.. good plan. if you buy new ones, just make sure you get those cheesy LED ones that everyone thinks are soooo kewl b/c they're "JDM" and come from AutoZone :devil:

God.. I have such an ass-hole-ish personality sometimes.. I'm almost always sarcastic about stuff.

if you don't get the led ones your not JDM yo

i'm leaving for 2 weeks, finally going home on christmas leave. been 2 years. well happy holidays everyone.

if you don't get the led ones your not JDM yo

Lol, JDM is not LHD. :grinyes:

I'm hella JDM mang

I''m about go out and do my nozzle switch... as soon as Wheel of Fortune is over

Well I had good news and bad news tonight.

Good News: I found out its the nozzle that isn't working

Bad News: A trip top both AutoZone and Pep Boys yielded the same result. "You guys sell windshield washer nozzles?" "All we have are the chrome light-up kind."


Goddamn ricers ruin everything

SEM trim black... then just cut off the wires and BAM.. as close to stock as possible

hmmm... I'm considering getting these (http://cgi.ebay.com/ebaymotors/3W-WINDSHIELD-WASHER-NOZZLE-ACCORD-EXPLORER-DEL-SOL-A4_W0QQcmdZViewItemQQcategoryZ33747QQihZ020QQitemZ 300182988910QQrdZ1QQsspagenameZWDVW) but I can definitely picture me trying to install them and finding out they don't fit securely to my hood.

Lol, after wheel of fortune.

Why not try a wrecker, get a set of an old honda there?

Do what I did, the pass side nozzle used to be single spray, so I whacked a dual spray in there, and they're pretty much universal, except the "integrated" designs... those won't fit, and you can tell if it will fit just by looking at it.

Most of the ones w/ the LEDs and anything w/ wiring will actually bolt-in, so you can adjust it until it sits flat, so that won't be a problem.

Those ones on eBay should fit, I mean, c'mon, they're only sprayers... it's not like they can "not fit right" :P

Maybe I'll get rid of the sprayer nozzles and install some James Bond style mini-guns to pop out of the hood instead. Perhaps a small rocket launcher

http://myspacetv.com/index.cfm?fuseacti ... d=24239935 (http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=24239935)

http://www.leenks.com/video1167.html

Dont mess with Santa

rofl... rocket launcher.. everyone knows you'd have to do that XXX style and put them behind the headlights :P

Hell no, he just HID's... he not messin with them...

lol.. Someone told me that the 88-89 CRX Si came stock w/ projector lights... is that true? Cuz if it is, I know where there are a couple sitting and the headlights fit perfectly, brackets and all, right into my Sedan.

Wow... that santa @ leenks.com must've been Chuck Norris in disguise... didn't you make the correlation w/ the "roundhouse kick" to the head? HHAHHA

Why not hook up one of those high pressure gerneys (spelling?) to a compressor, that'll clean your windscreen!