Progress - 1:12 Skyline R32 GTR

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-001.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-002.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-003.jpg

The base kit is the 1:12 Fujimi Veilside Nissan Skyline R32 GTR.
OK, I have had this kit for 18 months now and been itching to start it.
I also wanted to enhance it some.
I doubt I will go with the Veilside body kit at the moment, but maybe, the body is way in the future.
I have started with the brake discs, these are only prototypes at the moment not quite happy yet, but you get the idea.
The same goes for the front suspension, it should be better when I get the longer springs later this week.
Aftermarket parts 1:12 are near imposible to find so, all the aluminium parts you will see are machined by myself on a mini Lathe and Mini Milling Machine unless stated otherwise.

Thanks for looking,
hopefully I'll get to finish it oneday :)

damn! gonna be sweet!

good stuff

OMG! :eek: Another great model in progress. :thumbsup:

Looks pimp so far.

Holy Crap!! this is gonna be awesome!!

Going to be a sweet and detailed project!

Awsome work!! :smokin:

now this is something... THis will be awesome :)

Sex on wheels. Eventually.

:eek2: holy crap!! How did u make the springs? paper clip?

you beat me to it i was saving up too buy this $140 or some dollar kit from HLJ great work im looking forward too seeing it done.

Man I agree with gtmike this is gonna be one detailed project

Off the hook dude! Will be keeping a watchful eye on the progress

Wow!!!!!!!!!!!!

oh my gosh, that is one sweet start ! the brakes and suspension are AWESOME, they almost look real, i mean, they are real close to reality, hehe. the machined suspension i just amazing. man this is gonna be a great and detailed build, as most of your model.

i will sure keep an eye on this one. Good luck.

Awesome project :eek: Good luck ;)

Will follow it very carefully!

Must be nice to have your own lathe and milling machine. Are those run via Cam system?

Must be nice to have your own lathe and milling machine. Are those run via Cam system?No they are totally manual operted machines

This is the Lathe

http://www.spc.org.uk/tools/lathe3.jpg

http://www.spc.org.uk/tools/lathe2.jpg

and this is the Milling Machine

http://www.machinemart.co.uk/images/products/hi/MM060710850C.jpg

holy shat! thas awsome! This is going to be an amazing model!

Steve, you are a true modelling innovator!! Those components look more realistic than the pieces on my 1:1 car!!:eek: :smokin: :sunglasse :smile: :icon16:

C'Mon....that's just unfair....LOL. Just Kidding. This looks very promising....

This one will take years before it's finished, but it's an absolutely awesome project. Never forget to post all the progress you make :D

C'Mon....that's just unfair....LOL. Just Kidding. This looks very promising....
that IS unfair....not kidding.

lol

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-004.jpg

Machined Brake Master Cylinder

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-005.jpg

Plastic Handbrake removed and turned piece added

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-006.jpg

Engine bay in progress

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-007.jpg

Plastic Oil Filter removed and turned aluminium one added, will be moved later as i'm fitting an oil cooler. Also machine Oil Filler Cap has been added.

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-008.jpg

ABS Brake with more detail added. (test line fitted only)

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-009.jpg

Basic Oil Cooler started

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-010.jpg

Plastic Gear Lever removed and Turned NISMO one added.

I have been work on this non stop most evenings so far.
Most parts need more work and detail added, but you get the idea.
I have ordered some Detail Master Braided lines, which sould be here soon.

Thanks

amazing!
i remember when you got this model, ive been waiting for you to build this

wow with the right tools you can do anything

amazing!
i remember when you got this model, ive been waiting for you to build this
Yeap it was a while back now, but for anyone who wants to see the kit laid out here it is : http://www.automotiveforums.com/vbulletin/showthread.php?t=93775

yeah, and with experience it can look good too, great job Steve

Wow Steve this is really awesome !!! machined parts are nice, they look so good on there. This build will be one of the most detailed kit we've ever got in here if you keep custom building everything like that :D

Dude you are too much. Unbelievalbe quality work your creating here. You should sell an upgrade kit or something. Impressive at the very least.

You should sell an upgrade kit or something.
Nice idea but I don't think it would sell well, not many people have the kit or will buy it as it quite expensive to start with.

I often thougt about ordering this kit, but was afraid of fujimi fit problems at such an expensive price. Now if tamiya were to make a 1:12 skyline I would have 3 already. Have you hand any problems with the kit so far that are really notable?

Have you hand any problems with the kit so far that are really notable?
Not yet but I have not even opened the body. It is definatley for the more advance model maker, if you use the resin body parts.
I'm throwing away loads of bits and remaking them so fit problems are not something I'm worried about.
But so far, the chassis and engine all seem fine.
If you want you don't need to glue much at all it is held together with screws, but I'm filling all the holes in and gluing it all instead.

Steve, you have really made an investmement on this one!

Progress is staggering!!

Did you have to do a course or something to learn how to produce turned parts? Was the machinery expensive??

Did you have to do a course or something to learn how to produce turned parts? Was the machinery expensive??
I learned to use a Lathe and milling machine when I did my engineering apprenticeship many years ago, so it was just a case of remembering, but it's really simple.
The Lathe was 435 Pounds and the Milling Machine 282 Pounds, but they get used for more that the Scale Car modeling (but mainly that at the moment)

oh snap 1/12 skyline i can't believe i did find this tread sooner look like a great start hiroboy.
The spring look so much better than stock and it's so detailed great progress.

That R32 Ownz!!!

WoW ! some people have way too much money :D

Look incredibly awesome !

I want to put my pathetic models away now:(

man I could only see a masterpiece!!

I want to put my pathetic models away now:(
Get away.... :sorry:
Nothing Pathetic about your models :)

Tonight I'm about to start work on re-doing the Exhaust Manifold and Tubro/s.
What do we think is best 2 off smaller Turbo's or 1 off Large Turbo.?
Love to hear your ideas, and pics if any.

This is absolutely amazing!

JeFF

You should make this thread a sticky!!!!

Great progress so far, Cant wait for more pics. I will deffinatly be frequenting this thread. :sunglasse

I say two smaller turbos. Dyno queens need not apply. I've oft considered getting a lathe, at least, and there are some rather inexpensive model-specific lathes and milling machines available (for those who may be interested). This is going to be just fantastic, I can't wait to see all the detail you put in, so far it's just beautiful. 1:12 seems to be the way to go detailwise, these days.

i agree with willimo, 2 smaller turbos would be nice, keep up the amazing work!

I'm speechless! This will no doubt be a fantastic model when finished.
The machine work so far looks pretty good for someone who is rembering their trade, I too am an old engineering apprentice but I moved into the audio visual world straight after my apprenticeship, so I know how it feels to remember stuff like speeds and feeds. Good luck Steve, not that you need it.
Blair

OMG!!!! thats sweet ceep up the good work.

Hiro my man...

its been a while since i been here on AF... so busy and everything.

but i see you started your adventure on the 1/12 GTR, hey I was wondering if it was possible for you to replicate those parts in a resin cast so I can buy a set of this stuff you are making, I really want to do my ABS lines, but ive not started yet. Im really looking forward to his great build you got going...

but please.... if you can for the modelling community, can you some how replicate your parts and then put them in a package to sell out?

In anycase, I will be following this thread with my very last breath... welcome to the adventure of a 1/12 GTR... don't forget the sanding on the body... that will take time.

See you Hiro

but please.... if you can for the modelling community, can you some how replicate your parts and then put them in a package to sell out?

Perhaps this is an opportunity for an SAS/Hiro Boy collaboration? I can see a beautiful relationship developing here!! :naughty:

WOW! SUPER DETAIL SKYLINE!!! My dream......

http://files.automotiveforums.com/gallery/watermark.php?file=/503/35621homer-drool.JPG

Can you make a workable RB out of that machine??

:eek2: :eek2: :eek2: :eek2:

daaayyaammmm!!! dat is wut i call detail! Hey r u gonna machine those turbos too..dat would be friggin tite!!

Wow, this is going to be one of the best, if not THE best model ever posted on this forum. I got a question, though. What kinds of things can be made with a milling machine? Do you know of any good sites that have information on them? I tried searching, but I always come up with links to books. Anyway, keep up the good work!

I personally think one large turbo would look better because it would definitely keep the engine looking clean as well not be missed by any on lookers. Go with the large singular turbo, gives you plenty material for detailing also.

If I may, 2 smaller machined aluminum turbos, properly painted with heat stains would look absolutely stuning, plus the plumbing would be a real stand out.

Steve - I am VERY impressed with this model, as I am with all your models, please keep progress pics coming.

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-012.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-013.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-014.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-015.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-016.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-017.jpg

http://www.spc.org.uk/nissan/1-12_skyline/1-12-r32skyline-011.jpg

A bit more progress made over the last week.

Some of the bits look a bit rought but don't forgt how small they are and the camera seems to put up marks and scratchs the naked eye can't.

Thanks

WOW ! That's stunning. Makes me want a lathe badly.

Holy shit! Now are all these parts hand crafted or PE?

Holy shit! Now are all these parts hand crafted or PE?
Hand crafted as I can find PE stuff,so I'm doing it myself for now.