|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
1999 Silverado Drivers seat track
The manual seat track on my 1999 Silverado is broken and the seat will no longer lock in position. I would like to know if I can replace the manual seat assembly with a power seat assembly? If so, what years will work and is there a lot of wiring that is required?
Thanks, Mike |
|
#2
|
|||
|
|||
|
Re: 1999 Silverado Drivers seat track
Quote:
For 99-02's some components were plug-and-play, but on seats I'm not sure. I wired up my seat to an ignition power source at the column, and grounded it at a front mounting spot for the seat. When you get your seats, make sure you get the wiring harness at the seat, the whole thing, you'll need it.
__________________
1999 GMC Sierra RCSB 4.3L V6 overall stock plus some exterior and interior work. |
|
#3
|
|||
|
|||
|
Re: 1999 Silverado Drivers seat track
What wiring harness are you talking about? My truck only has a small connector under the seat. The electric seats I picked up (couldn't find a manual seat) has the small connector the a wider multi-pin connector.
|
|
#4
|
|||
|
|||
|
Re: 1999 Silverado Drivers seat track
Quote:
The other connector is the harness I'm talking about...it's the harness for your Power Slide, Power tilt and raise/lower. Does your power seats have power recline or manual recline?
__________________
1999 GMC Sierra RCSB 4.3L V6 overall stock plus some exterior and interior work. |
|
#5
|
|||
|
|||
|
Re: 1999 Silverado Drivers seat track
I ended up swapping out the broken back. It's not show ready, but it works. Thanks anyway.
|
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|