|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Engineering/ Technical Ask technical questions about cars. Do you know how a car engine works? |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-19-2003, 08:04 AM
|
|||
|
|||
|
B16A2 into a '95 Ex coupe
I've recently purchased a '95 EX coupe. I've been looking all around for any info on the wiring needs for dropping in a B16A2. I've found wiring diagrams that help people without VTEC already wired, but I already have it. Is the wiring required for the B16A2 VTEC the same as for my SOHC VTEC? If the wiring is essentially the same, can I just switch the ECU and the engines without any wiring issues? Thanks for any info anyone can give.
|
|
#2
04-19-2003, 08:38 AM
|
||||
|
||||
|
all you have to do after swapping the motor and ecu is run the knock sensor wire. btw is it the 92-95 sir2 b16a or the 99-00 si b16a2. if it the sir2 the motor will drop right in, if its the 99-00 si then there is some wiring that needs to be taken care of and also some mounts will have to be changed to integra ones.
__________________
1994 civic ex - b16a sir2 w/lsd too much to list http://www.cardomain.com/memberpage/423478
|
|
#4
04-19-2003, 07:53 PM
|
||||
|
||||
|
that motor would drop right in no problem and everything connects right up. only thing you need to do is run the knock sensor wire.
__________________
1994 civic ex - b16a sir2 w/lsd too much to list http://www.cardomain.com/memberpage/423478
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
