|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-21-2003, 01:58 AM
|
|||
|
|||
|
4.3l V6
ok i have a 93 S-10 its in really good shape except the 2.8L is TOAST but the tranny is good and soo is the rest of the car now i have heard that with a little work a 4.3L v6 will bolt right up with a mount kit but what about the tranny the S-10 is a 5spd so what all do i need i found a wrecking yard that has an engine for $500 out of a 91 blazer 4x4 will that motor mount up with a mount kit?? its TBI so i wont have to upgrade to multi port will everything work??
__________________
Crxce- theoretically if u laid a starter on a table and hooked up the wires would it run??? BLU CIVIC- no...it doesn't have any legs 
|
|
#2
03-31-2003, 07:03 AM
|
||||
|
||||
|
the bellhousings on the 2.8 trannies are different than the 4.3's. you'll need another tranny also...
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
