|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-07-2003, 06:16 PM
|
|||
|
|||
|
89 Jimmy Steering Column Wiring Question
Hi,
I just replace the steering column on my son's 89 GMC Jimmy. Everything is great except I don't remember (didn't make a note...my bad) where the single wire from the steering column goes. It is a single wire that has a male connector on it. Can't seem to find where it goes or what it does. Everything appears to work fine. I have not checked the Cruise control so maybe that is what it is for. Also, there is a connector on the steering column that seems to slide back and forth. It clips into the steering column and has 2 cables that plug into it. What is that for and what does it do? Thanks! Kip |
|
#2
02-07-2003, 07:29 PM
|
||||
|
||||
|
If the single wire you are referring to is a thick black wire I would have to say that it is the cruise control connector. The other one I'm not sure..you said cables..? the only thing I can think of is the nuetral safety switch at the base of the column..?
|
|
#3
02-07-2003, 08:00 PM
|
|||
|
|||
|
That appears to be the cruise control because that is the only thing that is not working. Any idea where that plugs into? Also, the bracket I am referring to is white and is snapped in towrds the bottom of the steering column (approx mideway down) There are 2 2-pin connectros that plug in and the bracket slides side to side and has click detents.
Thanks Kip |
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
