UK GT Dyno'd

nismo_gt · #1 07-22-2002, 02:57 PM

Finally got my GT dyno'd on saturday, its stock with
a HKS catback exhaust.
I wanted to get a some figures to start with so I can see what
differences the mod's really make.
As stock = 149.0 bhp @ 6500 rpm & 126 lbf-ft of torque @ 5530 rpm which isnt bad for standard

Neil82 · #2 07-23-2002, 07:17 AM

Your torque is very poor for a GT (althought kevin made about the same from his standard GT)

I made 162 torque and 144 lb ft torque.

Im even happier with my figures now.

nismo_gt · #3 07-23-2002, 07:57 AM

Altho your dyno pre header was 141 bhp !!
my GT's only done 16,000 miles so its only just runing in

Ambient temps were also much higher on Saturday

Neil82 · #4 07-23-2002, 08:52 AM

My car made 145/136 lb ft torque before i fitted the HSH... plus i still have a standard GT mid section.

Neil82 · #5 07-23-2002, 08:53 AM

my temp was 31 urs was 33

Neil82 · #6 07-23-2002, 08:54 AM

What gear was your dyno run done in?

nismo_gt · #7 07-23-2002, 08:59 AM

You got some pretty good figures
I'll let u know how she runs with the header on
it'll be an interesting comparison
Not sure why the torques down tho ?? were u using a diffrent intake ?

Neil82 · #8 07-23-2002, 09:14 AM

I only have a k and n panel pop in filter.... have u bought a hsh?

nismo_gt · #9 07-23-2002, 03:32 PM

Quote:

Originally posted by Neil82
What gear was your dyno run done in?

The gear will only effect the wheel/drag output
so shouldnt make any difference

Thread Thread Starter Forum Replies Last Post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
got my '03 dyno'd	Ooomph	Viper \| Viper SRT19 Roadster	2	01-25-2005 08:56 PM
I just dyno'd my MR2	Need2Speed	MR2/MR-S	22	10-22-2004 02:15 AM
Dyno'd it again today	B16a4me	Asia/Pacific	16	06-21-2002 07:03 PM
Just Dyno'd My Car Again	turbocivic4	Engineering/ Technical	21	02-27-2002 01:17 PM
Got my car Dyno'd	P11GT	General	29	10-13-2001 06:24 PM

POST REPLY TO THIS THREAD