|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
12-29-2001, 10:02 PM
|
||||
|
||||
Anyone Please Help me with chip install
i just got a performancec chip to put into my ecu. the chip i got has 14 pair of wire legs and i got another one with it that is just like it but its just the legs and a frame that you can plug the other one into. my ecu has chips the same dimentions as the ones i got but they all have 22 legs. wtf???
|
|
#2
12-30-2001, 12:02 AM
|
||||
|
||||
|
update
ok. in the bottom right hand corner of the ecu (wire harnes on the left side) there is a blank spot where the chip will fit but there is not an installed chip in its place. it is numbered 27256. would i then just unsodder the closed holes and plug the chip in there?
|
|
#3
12-30-2001, 12:59 AM
|
||||
|
||||
|
ok. i got detailed instructions from a guy off ebay. the chip goes in the empty slot and you have to take out another one, then add a jumber and a resistor in another place. thanks for looking. if anybody needs the instructions in the future hit me up.
|
|
#5
01-06-2002, 02:40 AM
|
||||
|
||||
|
Quote:
__________________
-Original PH Member- Registered in May of 2001 '98 Honda Accord Sedan 2.3L VTEC 4cyl 5-speed Generic Cold Air Intake 205/60/15 Bridgestone Potenza RE950's Save the Oompa-Loompas.....a site I helped create http://www.oompa-loompas.net
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
