FS: Garrett T25 Turbo & Apexi Rev/Speed Meter

[ssjgokoux2]

I am selling a used T25 turbo that came off a 1997 S13 blacktop motor w/ 40k miles, the turbine is a .64 A/R and the compressor is a .80 A/R
The turbine spins freely with no play
This is in very good condition, I'm also selling
this with a Turbo Downpipe/Dump Pipe that is brand new
and it will fit a T25 or T28 with a 3" diameter.
I'm including the coolent connections of course which
came with the turbo and I'm including a new oil return flange w/ seal.

Reason for selling: I planned to use this on my V6 MX-6 and yes
it would work perfectly but I'm thinking I should go alot bigger such
as a T3/T04E... and i would hate to get a turbo kit that would only
be capable of a T28 upgrade without a whole new setup.
I want to sell everything together,
Pics: Click Here

Everything together, I'll take $300 + Shipping
I'm willing to trade, so if your interested leave me a private message
or send me an e-mail.
(price not set in stone)
NOTE: its the turbo on the right & I'll be posting more pics soon

I'm also selling my Apexi RSM Rev Speed Meter, its been
used about 6 months with some scuff marks but they aren't
noticable, mostly on the back.

Complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. The unit also delivers a host of functions.

Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m/200m/400m times with trap speed, 0-100km/h/200km/h/300km/h times, Mid Range Acceleration (The user can preset any range of speed to measure.), Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning, RPM and Speed Outputs (For external devices requiring an RPM or speed signal.), Tire Size Correction (For accelerationand timing accuracy.), and Vehicle weight input.

I'm including the G sensor which displays how many
G's your pulling and also a rough estimate of your horse power.
Stand and manual included
You'll need a wiring diagram for you car to hook up +, - and RPM signal etc.
This normally costs upwards of $300-$400 with everything.
I'm giving it up for $175 for rev/speed $75 for g sensor & stand + shipping =$250
This sells on ebay for over $200 w/out the g sensor and stand.

This will also work inconjunction with your apexi tach and "MAY" work with others...

CLICK HERE FOR PIC

Parts that I need:

Greddy Blow Off Valve
T3/T04E w/ either 50 or 60 trim
HKS Turbo Timer Type 0
12:1 FMU Kit
Boost Gauge
Air Fuel Mixture Gauge
Tial Wastegate

If you have something to offer let me know..