|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Diecast Car Modeling Discuss and show diecast vehicles that you have modified, or that you have collected. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
08-26-2003, 05:25 PM
|
||||
|
||||
|
H1 Convertible
Another Hummer of mine (I got three of em in a pack for 20 bucks) this is a little more subtle. If you have seen any military movie or perhaps a real military hummer you will know that the softtop versions have a softtop for a reason. With a few quick cuts I made this a topless H1. Of course the stock model has no bed since the top doesn't normally come off so I used my standard plastic packaging and some VERY slow drying glue (I hate the stuff) and made a bed. A bit of black spray paint and some glue in the right places and voila! Note the small piece in the back of the H1 that would hold tapes and things is gone to make a smoot passage. A bumper sticker from my H2 now has a home in the cabin as well. Another obvious feature is the H2 rims (guess why I had those availible...)
|
|
#2
08-26-2003, 06:02 PM
|
||||
|
||||
Sorry
Not trying to post whore
 but I totally forgot about these pics until about 2 minutes after I posted. Since I stole the axles from the H2 and put them on the H1 directly I also slapped in some extra brakes I had. These come straight from a Lambo and fill up that wheel well a bit better than the H2s brakes.
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
...........................
