Remote programming for 93 Silo

[RoccoT]

Will these procedures work for a 93 remote entry? Or can anyone post the procedure for me?

Thanks

[Jeff Culb]

Ignition Key must be in "on" position. To reset or set the programming for a remote, you must find the remote receiver located and mounted on the front passenger side in front of the door. You may have to remove the sound insulation and possible the glovebox to view the receiver unit. On the top of the receiver press in the program button. You will hear the doors lock and unlock indicating the program has been reset. You will then have 10 seconds to program each remote by pressing any of the buttons on the transmitter. The receiving unit will confirm by locking/unlocking doors. You then have an additional 10 seconds to program second remote. - Info came from 1993 Silhouette dealer's service manual. Good Luck!