Seat belt light on - code 32?

[tkswan]

2002 LS V8 - 150k miles

Selt belt light is on.

bilink-blink-blink [pause] blink-blink

I'm assuming is a code 32. What does code 32 mean?

[joegr]

Originally Posted by tkswan

2002 LS V8 - 150k miles

Selt belt light is on.

bilink-blink-blink [pause] blink-blink

I'm assuming is a code 32. What does code 32 mean?

It means "Driver Air Bag Circuit Resistance High "

This could be a bad driver's airbag in the steering wheel, a bad airbag in the seat, bad wiring (includes connectors), a bad clockspring, or a bad RCM (restraint control module).

In practice, it is usually the clockspring. The second most common failure is the airbag connector under the driver's seat.

[tkswan]

Originally Posted by joegr

It means "Driver Air Bag Circuit Resistance High "

This could be a bad driver's airbag in the steering wheel, a bad airbag in the seat, bad wiring (includes connectors), a bad clockspring, or a bad RCM (restraint control module).

In practice, it is usually the clockspring. The second most common failure is the airbag connector under the driver's seat.

again! I replaced it in 2008. The Clock Spring Replacement post.

[tkswan]

Originally Posted by joegr

It means "Driver Air Bag Circuit Resistance High "

This could be a bad driver's airbag in the steering wheel, a bad airbag in the seat, bad wiring (includes connectors), a bad clockspring, or a bad RCM (restraint control module).

In practice, it is usually the clockspring. The second most common failure is the airbag connector under the driver's seat.

ok so ill check the connector first.