|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Dec 2011
Location: Benton, Kentucky
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
2006 Police Interceptor wont start!
I am having a terrible time with my Crown Vic. I was going down the road and it just died....rolled into a driveway it wouldn't start. The throttle actuator was making a fast clicking sound.
Some funny things going on here. First, the odometer reads "------" when you try to start it...it will turn over but not start. Also, my instrument panel warning indicators come on and go off randomly. I replaced the ECU no help there. I replaced the throttle also, and it still won't start. However, if I remove the throttle actuator connector, it will start and idle, because theres nothing to control the pedal with. You cannot read the computer with that plug hooked up but you can when it's unhooked. Im really having a time figuring this one out. anyone have any ideas? |
|
|
|
|
|
|
#2 | |
|
AF Enthusiast
|
Re: 2006 Police Interceptor wont start!
I'm not too familiar with the drive by wire models, but sounds to me like it might be an electrical problem stemming from whatever you are disconnecting.
__________________
![]() 2000 Mercury Grand Marquis LS - 119k / 14.89s @ 92.11MPH [ pictures | videos ] > Dual Flowmaster Delta 40s / J-Mod / PI Intake Manifold & Cams / Marauder Air Box & 80mm MAF / 3.55 Trac-Lok > Bumper Tuck / Steeda UD Pulleys / CVPI Zip Tube / Ported & Polished Plenum / BBK 70mm TB > BOC 93 Octane Tune / Headlight Relay Upgrade / 17mm rear stabilizer bar / Heinous Aluminum Billet Rear Control Arms > CVPI aluminum driveshaft |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|