vtec

[ackyoura]

I have a question. My Vtec kicks in at 6 grand, and is killed by the rev limiter at 7. The Vtec doesnt pull nearly as hard as a b16. I started to check the vtec soleniod, and found that the blue/black wire doesnt have 12 volts from the PCM. Any ideas???

[95 geser]

you have a gsr, and its limiting at 7000,u should check wat kind of ecu you have,vtec should be from 4500 to 5000 depending on conditions,and it shouldent limit untill 8100

[dc2_bountyinteg]

your distributor may need to be rebuilt. is your ecu throwing a code? if so check it at hondata

[scallywag]

GSR has a 2 stage vtec, The first should kick in at around 4500, and the second at a little over 6000. But your rev limit shouldn't cut fuel till about 85000. Even though the red line is at 8100, mine cuts at about 8400-8500. Check your ecu like mentioned above.