|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-08-2004, 10:49 PM
|
||||
|
||||
|
88 Accord mastercyl.
Is there anyway to bleed the mastercyl. I am working on a car that has been sitting for a few years with a dry master cyl. I just did new pads up front then drums in the rear. I have done a full bleed all the way around like six times now. Bleeding with a clear tube holding it above the bleeder with one end on the bleeder. The other end in a jar of fluid. I was getting air on the rear and pass side front. The driverside front is being a pain. Very little fluid moving and I can hear air in the master cyl.
If anyone knows please help. I want this car done 
__________________
Rules of the game fast,good, cheap pick any 2  fast + good = not cheap  fast +cheap = not good  good + cheap = not fast     Because the water has no speed limits
|
|
#2
02-09-2004, 08:39 PM
|
|||
|
|||
|
Re: 88 Accord mastercyl.
hey just buy a master cylinder at a junkyard...probably you will spend 30 dollars...replace the one off your car and see what happens...i had the same problem once and it work...the air that your are listening is a leak on your cylinder..probably the seal....good luck
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
