 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
11-24-2010, 08:17 PM
|
#1 | |
|
AF Newbie
Join Date: Nov 2010
Location: southfield, Michigan
Posts: 80
Thanks: 1
Thanked 1 Time in 1 Post
|
Sliding door power-lock/unlock not working
Things are breaking faster then I can fix them, and it's only week one...
Passenger side (non-powered) sliding door power-lock/unlock stopped working today. Was working earlier today, then not working this evening. Ambient temps have fallen to the low-'30s, vehicle is in an unheated detached garage. Lock works properly manually. Presuming it's related to the striker/plunger assembly, yet can't find the "side door contactor" pin breakout. Have a copy of the harness (thanks, to another board member!), so I know the wire colors if I take it apart, yet wanted some guidance on power/continuity checks from the striker or plunger assembly. Have looked on this forum and google, yet haven't come across yet. Will start by cleaning the striker and plungers tomorrow, yet next up would be continuity and voltage checks. Does anyone have the striker/plunger pin-out? Thanks! |
|
|
|
|
11-24-2010, 09:17 PM
|
#2 | |
|
AF Newbie
Join Date: Nov 2005
Location: halifax
Posts: 63
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Sliding door power-lock/unlock not working
clean the contacts with some brasso, or some light duty sand paper...worked for me
__________________
2000 safari awd |
|
|
|
|
|
11-25-2010, 09:32 AM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Nov 2010
Location: southfield, Michigan
Posts: 80
Thanks: 1
Thanked 1 Time in 1 Post
|
Re: Sliding door power-lock/unlock not working
Didn't have any Brasso (yes, I actually remember what that is!), or light-duty sandpaper (only the nasty stuff) lying around, or even some contact-cleaner, so I tried a "Scotch-Brite Heavy Duty Scour Pad", and that did the trick. The sliding door lock now responds again to the driver's-door lock-unlock button. Thanks!!!
Yet, if anyone has the pin-outs for the powered or non-powered sliding door's contactor pad, please feel free to share it. Thanks! |
|
|
|
|
|
11-26-2010, 06:34 PM
|
#4 | |
|
AF Regular
Join Date: Dec 2009
Location: Harrisonville, Missouri
Posts: 497
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: Sliding door power-lock/unlock not working
What year is your rig? I have schem for a 1997....
__________________
1997 Chevrolet Venture SFI 3.4l Auto 249k 2006 Chevrolet Malibu Maxx SFI 3.5l Auto 81k http://www.s10forum.com/forum/attach...nsor-chart.gif |
|
|
|
|
| |||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
