Ferrari F50 GT

This is one of my Ferraris in progres. Its 1/24 Revell based F50 Barcheta converted in to racing machine F50 GT



http://img220.imageshack.us/img220/3429/dscf0436dq3.jpg

That's awesome! I have a picture of this beastly car. I can't wait to see this conversion complete.

Alex

Good subject to start!

i've tried the same on a tamiya kit but i've failed & damaged the body. i hope you can do it!

pay careful attention on all the curves & bulges throughout the racer.
i thought i've studied enough photos of the car, proceed to cut it up & later realised the front bonnet bulge was more pronounced than the F50...too late!

keep posting!

marc

Hi,

in my opinion the front holes should get closer to the red line

http://foto.arcor-online.net/palb/alben/28/1077928/6563313838666265.jpg

Nice to see someone try to tackle this car, great start so far. Can't wait to see more.

This is one of my Ferraris in progres. Its 1/24 Revell based F50 Barcheta converted in to racing machine F50 GT



http://img220.imageshack.us/img220/3429/dscf0436dq3.jpg

yes, yes! this is the part where i screwed up my F50GT...the nose!
your mod is much closer to the real car, more accurate at least to me.

keep posting!

marc

Sportracer 02
i think the front holes are ok, a least acording ro this picture. Maybe the shape is not 100% but they are close enough...

http://www.ferrariownersclub.co.uk/happenings/2002/march/F50gt/in_pits2.jpg

Sportracer 02
i think the front holes are ok, a least acording ro this picture. Maybe the shape is not 100% but they are close enough...



Hi,

I think, they are too small on your model, but: it is YOUR model

Maybe they are little bit too small, but im not going to repair them :)
I tripled the size of originale holes. For me they are fine ;)

more picutres are here:
http://www.makete.si/viewtopic.php?t=768&postdays=0&postorder=asc&start=0

i made them out of stiren and filler. http://shrani.si/files/dscf480411ejl.jpg

I would try this with THIS kit only, not the Tamiya. If you waste the Revell one it is no loss. You are doing great so far though. What are you going to use for the GT wheels though? I have been trying to source some like that for a while.

Ill try nismo gtr rims, modified of course ;)

Hi,

the white sheet shouldn´t sit exactly at the border of the opening, more at the inside like the blue line shows

http://foto.arcor-online.net/palb/alben/28/1077928/3761663666386231.jpg