![]() |
![]() |
Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
![]() | ![]() | ||
![]() | ![]() |
| Latest | 0 Rplys |
![]() |
#1 | |
AF Newbie
Join Date: Nov 2008
Location: Eureka, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
not 4runnin
my 95 4runneer 3.0 wont start. it cranks over but thats it.i checked the resistance on the coil,pickup coil, injectors,plug wires and replaced the cap and rotor,and efi relay.still nothing.the battery is good and ive got 12v going to the coil.what could i be overlooking?
|
|
![]() |
![]() |
![]() |
#2 | |
Resident Chemist
![]() |
Re: not 4runnin
Have you got a strong or weak spark? If it is not a really strong SNAP! when you test it, it may be the coil, resistance in spec or not.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
![]() |
![]() |
![]() |
#3 | |
AF Newbie
Thread starter
Join Date: Nov 2008
Location: Eureka, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: not 4runnin
the coil resistance is within spec and the wire from the battery to the coil reads 12v with the ignition on, but i cant get a spark from the end of the coil wire or at a spark plug
|
|
![]() |
![]() |
![]() |
#4 | |
Resident Chemist
![]() |
Re: not 4runnin
Check the resistance of the coil wire. Replace it if there is no continuity. If the coil wire is good, Replace the coil.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
![]() |
![]() |
![]() |
#5 | |
AF Newbie
Thread starter
Join Date: Nov 2008
Location: Eureka, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: not 4runnin
the coil wire has continuity and i already tried replacing the coil.still nothing.could it be the igniter?really hope not
should i have a spark at the distributer end of the coil wire on this model? |
|
![]() |
![]() |
![]() |
#6 | |
Resident Chemist
![]() |
Re: not 4runnin
Dowload the ignition portion of the FSM here and troubleshoot as on page IG-18.
Download the fuel injection portion of the manual here. The IGT signal test in the Ignition troubleshooting portion makes reference to specifications in the EFI manual. FSM for the 1995 4Runner can be downloaded in .rar format here. I think the bottom line is - if everything is good, it's the ignitor.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
![]() |
![]() |
![]() |
#7 | |
AF Newbie
Thread starter
Join Date: Nov 2008
Location: Eureka, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: not 4runnin
thanks for the info i was totally out of options
|
|
![]() |
![]() |
![]() |
#8 |
Resident Chemist
![]() |
Re: not 4runnin
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
![]() |
![]() |
![]() |
#9 | |
AF Newbie
Join Date: Nov 2008
Location: colorado springs, Colorado
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: not 4runnin
i have a 93, and mine did the same thing, i finally broke down and took it to a shop, they said it was my mass air flow sensor! i do not understand it, but my 4runner runs a hell of a lot better. i hope it works for you, try a junk yard cause i priced a new maf sensor and they are around 3 bills. my shop got a used one and it worked great. off hand i dont know how to test the maf, mainly cause i didnt check it, and still dont understand why it makes the damn thing not run, i guess i chalk that one up to lessons learned, but good luck.
|
|
![]() |
![]() |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|