Lambo hinge How to.....

[Lownslow]

i just started on it but this will be where ill post pics of the process

the subject for experimentation is a Revell C5 coupe with lambo style hinges keep your eyes on this thread

tools needed for this job
Needle nose pliers
Nylon thread or Scriber
File (coarse)

the doors have been cut out with sewing thread
or you can use Flys scriber method which ever suits you best


unfortunately i messed up took a pic of the wrong door..


Heres the vette with the right door cut off. File as neccesary you will do a lot of filing to make a good fit.


This is the demo hinge i made it should look like this but 1/24 use the pliers to make(adjust as neccesary)

[flyonthewall]

What a cool idea!!!

I have the 1/16 Fujimi Lambo that has opening doors, the mechanism for it is a piece of wire with 90degree bends either end with one at 12o'clock and the other at 3o'clock if u were to look at the wire end on. Will this be similar?

[Lownslow]

first update next update i will install the hinges and test them

as for the wheels im going with 19s and Brembos i also plan on using a C5 R hood and headlights. this one will be know as the SIKK ZO6 Koupe