|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
2001 grand prix gt 3.8 n/s. when i put it in drive and let the car creep forward on its own i say around maybe 1-5 mph. i hear a clunking noise coming from the front of the car. any ideas. it has brand new wheel bearings
|
|
#2
|
||||
|
||||
|
Re: clunking noise at a crawl
Was the clunking there before the hubs were replaced? What brand hubs and what axle nut torque was used?
__________________
'08 Pontiac Grand Prix GXP (Dark Slate Metallic) - LS4 5.3L V8 '02 Oldsmobile Alero GL2 - LA1 3400 V6 '99 Buick Regal LS - L36 Series II 3800 V6 '03 Honda CR250R MX - 2 Stroke 250cc '97 Pontiac Grand Prix GTP - L67 Series II 3800 V6 Supercharged (Sold) Timeslip 08/12/06 AF Community Guidelines |
|
#3
|
|||
|
|||
|
Re: clunking noise at a crawl
I used timken hubs and followed the procedure on the tips forum. I torqued everythignto spec. the noise was present befor the hubs also
|
|
#4
|
|||
|
|||
|
Re: clunking noise at a crawl
friend said my stabilizer links were bad. how hard are these to replace and what brand should i buy. is there a writeup to this and last but not least what sort of expensive special tools will i need. Thanks everyone
|
|
#5
|
||||
|
||||
|
Re: clunking noise at a crawl
Not too bad to replace, but they get rusty over the years and are sometimes hard to get off without using a hacksaw.
Check and make sure the stabilizer bar isnt cracked before you just replace the links. The bars seem to break before the links on these cars.
__________________
-2000 Grand Prix GTP 170,000mi (daily driver) -2000 Olds Alero 100,000mi (soon to be DD with gas at $3.45/gal) -1997 Chev K1500 4x4 115,000mi (Natalie's truck [nans_grandprix]) AF "2.0" Community Guidelines Conservative Victory 2012!!! "I'll Keep my Guns, Freedom, and Money. You can Keep the Change!" ----->>>>> Did You Know? <<<<<----- |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|