 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| WIP - Motorsports Post topics for any "Work In Process" motorsports vehicles in this sub-forum. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-25-2008, 11:05 AM
|
#1 | |
|
AF Newbie
Join Date: Jun 2008
Location: taipei, California
Posts: 18
Thanks: 0
Thanked 1 Time in 1 Post
|
Arta Nsx 2005
http://blog.yam.com/karls
歡迎到部落格參觀! 順便幫衝一下人氣!!哈哈!! 拖車環..  防滾籠.已經補土打磨完成上完色!  這個顏色質感很優吧!?  貼上水貼紙,注意輪框上有3張小貼紙,字體很小,別貼反了!  輪胎的螺絲..  組合後,輪子部份就完成囉!  碟煞盤,因為友人沒要求用蝕刻片..所以還是乖乖的分色.用蝕刻的話,質感大增,也方便多了, 不過需要用$$換來!!  噴上平光黑.  噴上鐵灰色.  組合後.  這些車體雖然本來就是黑色,在裡面也看不到,不過還是一樣要噴上平光黑..  一樣.  再來  再來.  這個到底是什麼東東?在駕駛室一邊放一個,是滅火器嗎?有沒有人可以解釋一下!!  這個玩意我也不知道,不要怪我!沒開過賽車嘛> <  這個我就知道了.哈哈!!噴上平光黑,按鈕依說明書點上各顏色的漆.  駕駛室.  賽車座椅噴上一點點類似毛茸感覺!  號碼牌.  駕駛室裡面的零件,噴上平光黑.  組合後.  駕駛室特寫1  駕駛室特寫2  進氣口組合補土.  車殼鑽1mm孔,裝天線用的.  車殼的一部份.  裝上去後用瞬間膠加爽身粉補土.然後用沙紙打磨.  全身用1000#的水補土噴過,當然這之前經過了很多打磨修補,  中間引擎蓋部份噴上亮白,不需要做遮蓋.  噴完後做遮蓋,準備噴車體  這次遇到最大的困難就是,被TAMIYA呼?了,TS-36根本就噴不出實車的感覺,所以 自己慢慢調顏色..  尾翼..  貼上貼紙後.  尾翼側邊貼紙.  完成後.  車體...  接著遮蓋噴車門黑框,是亮黑色,所以可以一起噴.  噴後.  最後撕開後的樣子..大致上的分色完成90%,剩後玻璃因為是平光,所以最後再處理.  再來就是貼水貼了,搬上這兩樣法寶.  經過了漫長的幾個夜晚的廝殺.終於完成了,  這台車在賽車中,看起來也沒特別的花俏,怎麼感覺小貼紙很多= . =   車殼拋光處理劑使用了10種之多法寶.  光澤魔術師.  為了方法拋光,後照鏡分別處理.  這個也一樣..  光澤魔術師.  光澤魔術師.  遮掩,準備噴平光黑.  噴完後..  雨刷.  黏玻璃使用這個.  玻璃完成照.  遮掩,準備噴紅色  噴完後  這個改噴螢光橘效果會比較好.  完成照.  噴平光黑.  捨去tamiya附的黑網,改用金屬網.  裁出形狀.  裝上後效果很滿意.  進氣孔,噴上平光黑,貼上水貼.  噴平光黑.  標誌部份噴紅色  底盤做無縫處理  噴上金屬藍.  噴平光黑.      天線部份切斷改用細金屬針.  完成照     http://blog.yam.com/karls |
|
|
|
|
06-25-2008, 12:15 PM
|
#2 | |
|
AF Enthusiast
Join Date: Jul 2004
Location: Taipei
Posts: 786
Thanks: 1
Thanked 4 Times in 4 Posts
|
Re: Arta Nsx 2005
哇~難得一見的台灣人....
作的粉漂亮捏.... 阿 在這個論壇有幾個要點: 1. 貼對地方: 像你這篇應該貼於"completed models" (完成模型)那邊 2. 即使英文粉破...盡量用英文...這樣才能讓大家充分欣賞 你的傑作 ... 看有沒有力氣翻一下你的第一篇... 看到你的研磨膏我都傻掉了...你用哪10種阿@_@? 透露一下咩.. I've asked Karls to edit the post into Eng... Its nice to see a fellow Taiwanese here  Or you could try this...: here Steve
__________________
Please read the following linked articals before posting a question. Once you have and still have questions, try to post your questions clearly. This will make a lot of people's blood pressure drop back to normal, including mine.  NEW TO THE AF MODELLING FORUM? PLEASE READ THIS FIRST AF Car Modeling Tutorial, How-To and Product Review Depository AF Car Modeling Frequently Asked Questions [FAQ] - * Look here first! * ver2.0 And finally,I wish you all happy modeling 
|
|
|
|
|
|
06-25-2008, 06:11 PM
|
#3 | |
|
AF Regular
 
Join Date: Oct 2007
Location: Union City, California
Posts: 207
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Arta Nsx 2005
Welcome to AF. Your NSX looks great, very nice paint job. Also an excellent tutorial.
__________________
Completed:      
|
|
|
|
|
|
06-26-2008, 06:45 AM
|
#4 | ||
|
AF Newbie
Thread starter
Join Date: Jun 2008
Location: taipei, California
Posts: 18
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: Arta Nsx 2005
Quote:
英文被你料中,實在破到不行.沒辦法翻@@ 研磨照片中有7瓶 +一瓶3m的蠟 +一瓶TAMIYA的水蠟 +一瓶氟素鈦 等於10瓶,在這一直打中文感覺有點怪怪的,有機會來我的部落格聊聊! |
||
|
|
|
|
06-26-2008, 06:52 AM
|
#5 | ||
|
AF Newbie
Thread starter
Join Date: Jun 2008
Location: taipei, California
Posts: 18
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: Arta Nsx 2005
Quote:
Your car too make very good My English not good Can hope you look understand! Frees can come my website takes a stroll  |
||
|
|
|
|
06-26-2008, 10:36 AM
|
#6 | |
|
AF Enthusiast
Join Date: May 2003
Posts: 559
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: Arta Nsx 2005
I hope you understand the word "Cool work !".
|
|
|
|
|
|
07-01-2008, 12:34 AM
|
#7 | |
|
AF Regular
Join Date: Oct 2004
Location: no, Washington DC
Posts: 146
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Arta Nsx 2005
wow, what a treat!
Amazing play by play. Only thing, offset might warrant a little attention. Ya know, only because the masking and painting AND polishing are all very refined. Give this car a stance. 
__________________
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
