My turbo

[hirofkd]

Here is a prototype of my small turbo. The diameter is about 6.5 mm, but it might shrunk a bit when cast with resin.


And here is a typical application.
Please ignore the air filter, which shouldn't be there, and unfinished exhaust header. Man, it's really tight.

[supratuner]

nice



are u going to make and sell these?

[Guido]

sure thing, looks really nice.

I can think about a dozen of applications for a turbo...

[fastlife]

when are they going to be available?

[fullbloodchop01]

looks soooo much better tha i thought!!!!so will you be selling this as a package? like with the turbo, headers, BOV, Wastegate, etc...?? because that would be AWSOME:frog:

[flyonthewall]

Nice work as always.

[bah humbug]

You've got to sell these.

[magicmanjk808]

Originally posted by fullbloodchop01
looks soooo much better tha i thought!!!!......

i have to agree here. i'm in for a buy, no question about it.

[hirofkd]

My commissioned work is delaying some of my projects, but I made a little progress on the ITR turbo kit. It's not a heavy duty turbo, so I made a small intercooler core, and made the core and pipes visible from the opening.
It was inspired by a Lan Evo, I saw the other day.
Right now, I'm waiting for putty to cure, and I'll file and sand it to the right shape.

[Integra14]

that is really nice, i was trying to make one too, but i couldn't get it as fast as u did!

[ShOrtyOC714]

Nice job!

[espin]

Looks like you took your time and got it right

[endlesskev86]

nice ~
i dun really get what u guys mean by "resin"

[Jonno]

Originally posted by endlesskev86

i dun really get what u guys mean by "resin"

Resin is basicly a plastic substitute. It comes as a liquid and is poured into a mold to dry. Most aftermarket parts from private sellers (take chris for example with SAS) use resin to make their parts.

I guess others should be able to tell you more.

[JDM Evo7]

Originally posted by hirofkd
My commissioned work is delaying some of my projects, but I made a little progress on the ITR turbo kit. It's not a heavy duty turbo, so I made a small intercooler core, and made the core and pipes visible from the opening.
It was inspired by a Lan Evo, I saw the other day.
Right now, I'm waiting for putty to cure, and I'll file and sand it to the right shape.

Your turbo looks fantastic! One thing on your intercooler, from your pic it seems as if the tubes and fins are going vertically, but your end tanks are left to right. The tubes on intercoolers always run inline with the end tanks. So for your end tanks and pipes as it appears in the pictures the tubes should run left to right. It could just be the pictures.