|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
09-16-2002, 12:06 AM
|
|||
|
|||
|
sr20 motor
hello people...i am a owner and i am wondeirng about your car. i have heard about a sr20 motor for the sentra. reason i am asking is cuz our 240/silvia use a sr20det in. same engine only for front. well any info will be great so i can say hondas suck even more. peace
__________________
-Aerospeed front strut bar -front and rear cross drilled Brembo rotors -polished AEM short-ram intake -HKS Super Dragger exhaust -205/55ZR-16 Yokohama AVS-I 
|
|
#2
09-16-2002, 10:43 AM
|
||||
|
||||
|
I don't really know what you're asking...but yes, the se sentra has the sr20de in it. It is the NA version of the det. Produces about 145 hp stock but can handle up to around 300-350 whp on stock internals. There are a couple people who have dropped the det into their sentras and from what I hear, it's a pretty easy swap. I don't know what else to tell ya
__________________
'01 Black Sentra SE Weapon-R intake, HS header, HKS catback, ES motor mounts, B&M short shifter, Tein coilovers Alpine 9835, Adire Koda 6.1, Adire Brahma 15, Arc 2100cxl, Linear Power 2.2hv, Cadence ZRS-8 '05 Silver WRX STi Injen SES Downpipe, HKS Carbon-Ti catback, Cobb Stage 2 Tune, TiC Super Shifter, TiC Klunk Killer, Tein springs, Nitto NT555R Drag Radials
|
|
#3
09-16-2002, 02:42 PM
|
|||
|
|||
|
yeah i am a big fucking moron. this is how it should have sounded the first time.
"hello people...i am a owner of a 240sx and i am wondeirng about your car. i have heard about a sr20det motor for the sentra. reason i am asking is cuz our 240/silvia uses a sr20det engine. so what i am trying to get at is if the sentra in Japan can come with sr20det motor. or if there is even a turbo sentra in japan. just wondering cuz of the fact that i have heard rumor that there is one. well any info will be great so i can say hondas suck even more. peace" that should be a little bit better. sorry for the way the first post sounded my mind was else where
__________________
-Aerospeed front strut bar -front and rear cross drilled Brembo rotors -polished AEM short-ram intake -HKS Super Dragger exhaust -205/55ZR-16 Yokohama AVS-I
|
|
#4
09-16-2002, 03:15 PM
|
|||
|
|||
|
there is a (b13 platform???) sunny gtir in japan with awd and a sr20det..
the S seried SR20DET come in a a inline rear drive config(but you should know that.) that rear drive config will not work in our cars.. the awd however works fine. the fact is most items that sentra Sr owners use to do up there SR n/a with a turbo is off those vehicles with AWD.. hope i didnt screw this up..
__________________
Staff- www.b15sentra.net when in doubt go with what works.  
|
|
#5
09-18-2002, 11:51 PM
|
|||
|
|||
|
Nah Matt pretty well said...
 But you might also wanna research these fine sites to find alot of questions that you might have in regards to the SR20DE motor.. www.se-r.net www.sr20deforum.com
__________________
2002 Nissan Xterra SE Black 1993 Sentra SE-R Black 1994 Sentra SE-R Red All SR20DE powered...
|
|
#6
09-19-2002, 01:10 AM
|
|||
|
|||
|
thanks for the info...but i was just wondering if there was a turbo sentra in japan...so keep killing honda ass out there...nissan rules...oh but 240 will rock you guys...
__________________
-Aerospeed front strut bar -front and rear cross drilled Brembo rotors -polished AEM short-ram intake -HKS Super Dragger exhaust -205/55ZR-16 Yokohama AVS-I
|
|
#7
09-19-2002, 07:59 AM
|
|||
|
|||
|
food for thought. (utlimately funny) i thought about possibly bolting a N/A Sr20 motor to a 240sx.. it would require alot of custom bends and such especially for the manifold. but with a 7500 rpm redline and some port polish compression you name it.. a 240 with a sr swap would kick royal ass.. something i would think about(if you cannot afford turbo maintence.. )
__________________
Staff- www.b15sentra.net when in doubt go with what works.
|
|
#8
09-19-2002, 08:26 PM
|
|||
|
|||
|
there is a n/a version of the sr that is rear wheel drive
__________________
-Aerospeed front strut bar -front and rear cross drilled Brembo rotors -polished AEM short-ram intake -HKS Super Dragger exhaust -205/55ZR-16 Yokohama AVS-I
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
