|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-28-2002, 12:22 PM
|
||||
|
||||
|
Do i really need the wiring harness?
This is how much i paid for my swap...motor/trans/ecu for 1087.50 after taxes!(thought u guys might wanna know) IT seems like it came with the whole wiring harness?? How can you really tell if its the whole harness or not? So do i need to buy the HaSport ones or just use the wiring on my crx si? Thanks
|
|
#2
03-28-2002, 01:14 PM
|
||||
|
||||
Harness
What motor did you get? If it's a ZC, the Si wiring harness will hook right up, if its a B16, you probably need to get an HASport so that it is complete. (I think, but I don't have a B16 personally, so you may want to verify that.) I do have a ZC, and my stock harness worked fine. Happy swapping!
|
|
#3
03-28-2002, 01:35 PM
|
||||
|
||||
|
Re: Harness
Quote:
 I have a b16. I was askin this because it seems like all the plugs match my rex plugs. I hope its all plug in shit! Yeh i do hope the swap goes good. Its my first time and so is my other friend who graduated from UTI..i hope he's a good help.
|
|
#4
03-28-2002, 06:17 PM
|
||||
|
||||
|
Just use your si harness man. Use the b16a harness for spare plugs for the 4 wires you need to run for the b16
|
|
#5
03-29-2002, 12:59 PM
|
|||
|
|||
|
Quote:
|
|
#6
03-29-2002, 09:55 PM
|
|||
|
|||
|
ya...just use your si harness...make sure you label it all so you dont f up...but my buddy and i did his wiring today in like an hour...real easy...
|
|
#7
03-29-2002, 10:21 PM
|
||||
|
||||
|
Quote:
|
|
#8
03-31-2002, 10:59 PM
|
|||
|
|||
|
im just picturing mine in my head, the long black wire, clutch cable?? they usually cut those and leave em on the motor....
|
|
#9
04-01-2002, 09:17 AM
|
||||
|
||||
|
Quote:
|
|
#10
04-01-2002, 07:39 PM
|
|||
|
|||
|
There should be a black boot covering the bottom part of the speed sensor that is still in the trans. Under it should be a clip holding the sensor into the trans. Take the clip out and pull the old sensor out. Then once the motor and trans are in the car plug in your stock speed sensor and secure it with the clip. HTH
__________________
91 civic 4dr b16a 14.8@94
|
|
#11
04-02-2002, 09:17 AM
|
||||
|
||||
|
Quote:
|
|
#12
04-02-2002, 02:29 PM
|
|||
|
|||
|
Yeah, there should be a clip holding the sensor into the b16 trans. Take it out and then plug in your stock sensor and use the clip to secure it.
__________________
91 civic 4dr b16a 14.8@94
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
