Installing White Faces

[LOK[R9]]

Well .... I bought those great white faces this Christmas. I tried to install them the week after but wasn't able to even pry out the plastic dash cover. NOW, I'm tired of waiting and I want it done. HOW!!!!!

Can some one explain me exactly what to do .. I know there is 2 screws but other than that .. don't know where the clips are and how to remove them. I've past nearly 2h30 trying and I was starting to brake things. Can someone help me please. I swear I'm gonna buy a HELM this summer so I won't post that kind of stupid question.

Horn out.

[LOK[R9]]

Damn ... I forgot....

My car is a 94 Civic HB. Thx.

Horn out.

[jimmyfunk]

here you go. Ignore the electrical stuff becuz this link is to install indiglo gauges, but it will show you how to take everything apart.

http://www.autotoys.com/New_Tech/DIY..._kit_civic.htm

[LOK[R9]]

Thx jimmy but the sample on the site is a 96-00 civic and mine is a 92-95. I need to know exactly where the clips are cause i can't figure it out. Thanx anyway.

Horn out.

[jimmyfunk]

sorry...can't help ya there

[praxis]

When you remove the 2 screws, you should be able to grasp the panel (at the edge where the screws were) and pull the panel out. there are clips at the vents and 3 (I think) on the bottom of the panel....you should be able to pull it right out.

Pull the top first (where you removed the screws) then grab the bottom of the panel (where the inst. cluster is) and pull, then pull at the right vent, then the left vent...it is really a game of a bit here and a bit there (a little at a time).

NEVER FORCE PLASTIC. It will come out with a little patience. Pull here, then there, then here, again.

[LOK[R9]]

thx a lot praxis. I guess I was doing it right but just hadn't all the patience. Even though I had been 2h30 on it. Well .... I'll try it again. Thx again.

Horn out.