|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-12-2004, 08:42 PM
|
|||
|
|||
|
ceramic or stainless headers? which is better?
alright i about to get headers for my teg and i was wondering which is better ceramic or stainless steal. Now i do eventually wanna go turbo some time in the future, dont know when but sometime. I was just thinkin of gettin ceramic b/c its cheaper but, what do u guys think??
|
|
#2
01-12-2004, 09:32 PM
|
||||
|
||||
|
i dont know if there are any gains in hp between ceramic or stainless headers. i think stainless are more for show cuz there "shiny" but they give the same hp gain as ceramic. Im gonna get a set of DC sports 4-1 ceramic headers for my 97 LS teggy. i heard that the 4-1 design gives a bit more hp than the 4-2-1 design. i would go with DC headers if i were u. dont get some cheap headers cuz they might crack on u. check on ebay for em. they run about $230
|
|
#3
01-12-2004, 09:46 PM
|
||||
|
||||
|
Re: ceramic or stainless headers? which is better?
Ceramic headers keep the heat of the exhaust in the exhaust. Think of it as a heatshield. The more heat and energy you keep in the pipes, the better it flows. So if you are looking for performance go with ceramic. By the way 4-2-1 is better for midrange torque and HP, (daily driving) and 4-1 is more top end (drag racing) no actual difference in gains, just different RPM ranges where the power is made. BTW, why is this post in the race forum, it should be in lets get technical....newbies.....
__________________
94' Del Sol VTEC (B16A3) SOLD. Accel plug wires, NGK iridium IX plugs, AEM short ram intake, DC sports ceramic coated header (4-2-1), Airmass high flow cat ,Custom Magnaflow exhaust, Bosal Brospeed tips, Neuspeed short throw shifter, Tokico clutch master cylinder, Tokico clutch slave cylinder, Prothane complete kit bushings, Brembo front rotors, NR EL-Glo instrument gauges, CTR LSD trans with ITR final drive, Exedy chromoly flywheel, ACT HDSS clutch kit, Raxle axles. |
|
#4
01-12-2004, 10:02 PM
|
||||
|
||||
|
Re: ceramic or stainless headers? which is better?
yes, this should be in the lets get technical forum as said above...
how about a ceramic coated stainless header? lol
__________________
 LS1 RX-7 Zoom Zoom |
|
#5
01-12-2004, 10:31 PM
|
||||
|
||||
|
moving/closing.
look at the FAQ in the integra forums. the answer is there. if its not indepth enough, feel free to ask for one of us to elaborate.
__________________
2003 Infiniti G35 99 Yamaha YZF-R6 (sold) 2000 Acura Integra Type R (sold) 1994 Acura Integra GSR (retired/sold) |
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
