|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-15-2003, 12:20 AM
|
|||
|
|||
|
2001 neon intake install HELP
i have a 2001 neon highline sedan i just bought a cold air intake for it but it didnt come with installation instructions i wanted to know if anyone has instructions on how to install a cold air intake on a 2000 up neon single cam 5speed any help please... thanks
|
|
#3
04-06-2004, 10:39 AM
|
|||
|
|||
|
Re: 2001 neon intake install HELP
quick instructions: this is a simple install
jack up the front end, or at least the right front end. If you don't you'll never get the resonator out, tire will be in the way. remove the front part of the splashguard in the fenderwell, 2 bolts, plus snap ons. remove bolts and cover from stock air filter box in engine bay. You will also need to remove 4 bolts on the inside of the filter box, that attach to the throttle body. everything should come out easily. remove the 2 bolts in the fenderwell that hold the resonator box and get that piece of crap out of there..lol loosen the screw clamps on the bellows tube (between throttle body and intake manifold) and remove it. Everything is now out of the vehicle and ready to install your Cold Air Intake. You should be able to put the new intake in without instructions from here, the parts are obvious on where they go and how to attach. If you need more help, let me know.
|
|
#4
04-06-2004, 10:41 AM
|
|||
|
|||
|
Re: 2001 neon intake install HELP
when i say right front end, i mean right, while facing the front of the car....lol sorry. I know it will be obvious which side the stock intake is on anyway...
|
|
#6
07-09-2006, 03:14 PM
|
|||
|
|||
|
Re: 2001 neon intake install HELP
i have a 2000 dodge neon all so and i also have a air intake that im tryin to but in but when i remove the throttle body to but it in all the car does is rev. do i have to keep it or is there a way i colud remove it?
|
|
#7
09-17-2008, 08:15 PM
|
|||
|
|||
|
Re: 2001 neon intake install HELP
i got a silly question. i got a cold air intake as well and im wondering where the mass air flow sensor goes there does not seem to be a place for it and i would assume that it is pretty important.would i be aith without it or do i need to finagle something?
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
