|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-03-2003, 10:37 PM
|
||||
|
||||
|
94 and 96 specs
alright I'm curious of the HP, torque, 0-60, 1/4mile, and top speed of a 94 z28 and 96 z28... if they are different, I don't know just curious
__________________
1989 RX-7 TII --- Just got rebuilt and street ported RB 3" dual exhaust, BNR stage 1 modified factory turbo, FCD, S-AFC II, 720cc secondaries, Aftermarket Turbo inlet duct w/K&N, Hawk HP+ pads HKS Blow-Off Valve, Stainless brake and clutch lines 
|
|
#2
12-03-2003, 11:25 PM
|
||||
|
||||
|
Gotcha covered here man.
1994 Z28 275 hp @5,000 rpm 325 lbs. ft. @ 2,000 rpm (another source also said 2400 rpm) 0-60 mph in 5.5 secs to 6.0(checked a few different sources and all where somewhere around this) tops speed of 159 mph Quarter mile in 14.4 secs at around 100 mph 1997-couldn't find info for just a 96 but 97 should be same 285 hp @ 5,200 rpm 325 lbs. ft. @ 2,400 0-60 mph in 5.4 to 5.9 (same thing as above, all close to same but not exactly the same time) Quarter mile in 14.5 secs @96.6 mph (shouldnt be slower the ealier model so I'd attribute this to being a bad run or maybe a different trans. Auto 4 speed vs manual 5 or 6 speed. No specs where givin as to the trans. used on these runs I've listed) Anyway, like I said, I looked at several different sources including the book "Camaro Preformance Portfolio" (which is probably not very accurate as the specs it game on teh cars often changed after a few pages  ) So hope this is what your looking for, and if anyone knows these specs to be wrong plz correct me, im far from being all knowing of the F-body  .
|
|
#3
12-03-2003, 11:29 PM
|
||||
|
||||
|
Sorry for my awful spelling and typing errors in that last post, Hope you understand it.
|
|
#4
12-04-2003, 03:36 PM
|
||||
|
||||
|
sweet thanks for the info...
you happen to know the wieghts?
__________________
1989 RX-7 TII --- Just got rebuilt and street ported RB 3" dual exhaust, BNR stage 1 modified factory turbo, FCD, S-AFC II, 720cc secondaries, Aftermarket Turbo inlet duct w/K&N, Hawk HP+ pads HKS Blow-Off Valve, Stainless brake and clutch lines
|
|
#5
12-04-2003, 08:16 PM
|
||||
|
||||
|
93-3,375lbs.
96/97-3,442lbs.
|
|
#6
12-05-2003, 10:03 PM
|
|||
|
|||
|
Re: 94 and 96 specs
Those factory specs sound about right, but some LT1's can actually break into the 13's in stock trim if driven properly. I know a person with just an intake and exhaust that is running 13.5's with his 93 LT1.
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
