|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-18-2003, 10:22 PM
|
||||
|
||||
|
3S-GTE ECU and injector Q's
How may injectors and what size and impredance...
Also, can these ECU's be re-flashed for more boost, (eg, reflash for bigger injectors) I have a friend with an MR2 and we are starting to research stock layout to begin mods... the more info the better!!!! Thanks in advance, 
|
|
#3
11-22-2003, 06:36 PM
|
|||
|
|||
|
Re: 3S-GTE ECU and injector Q's
cc will change with fuel pressure. 430 @38psi, 508 @52psi (base pressure) (numbers may not be exact, but damn close)
You can re-flash, ask Reg at RCTS in Calgary Alberta Canada. For a little more cash , go standealone ECU , and pay someone to tune it. Upgrading the ECU would only be perfect if the maps were programmed while the car was dyno'd or had a wb o2 system to tune the A/F . Over the phone ECU upgrading will not be 100% perfect.. As every engine is different... good luck!
|
| |||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
