|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
srt-4 tires on 2003 dodge neon r/t??
I got ahold of some factory srt-4 tires and rims. i want to put them on my neon r/t. the inside corner of the rear tire rubs on the shock tower. any advice as to how i will use these will help. mabye spacers? if so how thick can i get them?
|
|
#2
|
|||
|
|||
|
i thought the rims on a 2k3 r/t where 16x7 why would you go to 17x6?...
i don't see why you would need spacers.. i have 17x7s on my 2k1 and i've seen people with 18x7.5 w/o spacers.. hell if you wanted to you could fit 20s on a 00+ (i've seen it.. wasn't that great of a look )*note... now that i think about it.. the tires shouldn't rub unless you've lowered the car.. and if you have you might need to cut the strut stops. |
|
#3
|
|||
|
|||
|
I guess the tires are too big because everything is stock. 205/50 r 17 Michelen pilot sport.
|
|
#4
|
|||
|
|||
|
1/8" spacers did the trick. i looked at other neons and the r/t has wider springs in the back. I would have to go real low profile. I used these rims and tires because they only had 10 miles on them and i wanted to make them work.
|
|
#5
|
|||
|
|||
|
hmm... still find that wierd.. i have 215/45/17s and i'm using first gen neon springs...
|
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|