Show us ya computer chair

[tazdev]

just wondering if anyone out there has a 'different' style computer chair.

Here is one I just finished construction on.

R32 GTS-T M-Spec drivers seat + steel framing + computer chair base =



the only problem is that it is abut an inch to high even at its lowest setting but boy is it comfy



Right I've shown u mine now u show me yours

[tazdev]

and yes the base is still fully functional.

[ghostchild316]

I don't have pics of my seat but I ghetto fabed my own frankenstein chair out of a normal office chair(that was broken) and a spare 240SX driver seat I had laying around.needs a little more work but it still good!

Its hella comfy though

Nissan 0wnz!!

[tazdev]

Originally posted by ghostchild316

Nissan 0wnz!!

yup.


but I hear the honda seats are easier to mod as the base is almost flat.
I had to space 1 side up by about 25mm to get it level

[KatWoman]

Mine's not too exciting, nor is it too comfortable either, but it was free so I am not bitchin' about it. I wanna get a leather "manager's chair" from Staples. Last time I was there they had them for $70, down from the $150 they used to be, but I had to practice self control

[Moppie]

Honda > nissan.


Im sitting on one of my fathers old demonstrator chairs. (he imports and sells office chairs, so we currently have 3 in the flat )

It does everything a proper office chair should!


I wonder if there is much of a market for making chairs out of car seats?
My father can get bases, and gas lifts for very cheap, and in any quantity, and getting a mounting base welded up would not be that hard.
Getting the seats would be the easiest part, theres enough wreckers in Auckland.



tazdev how high is the current gas lift? and how high does it need to be? Might able to swap the one you have for a lower one. Can't have you getting RSI from a poorly adjusted chair.

[tazdev]

its a standard height 1 (what ever that is) but needs to be about 1" shorter

[Moppie]

Originally posted by tazdev
its a standard height 1

Theres no such thing.
The 3 chairs I have here, are all differnt hights. It depends on where it was manufactored, and what sort of chair it was from.

[Jimster]

My chair is your typical office chair- a butt cushion and backrest susion up/down adjustment and no armrests

[Oz]

Can't. Stains.:

[Moppie]

Originally posted by Oz
Can't. Stains.:

Scotchguard

[taranaki]

Still no digicam could be soon though!

Standard typist chair from discount office furniture chain.Recently upgraded from an old dining chair that had previously been used as a painter's trestle.


Wonder if RNZAF has any spare seats left over from its Skyhawk/Aermacchi fleets? preferably with the ejector seat mechanism still attatched?Make a nice xmas present for the dragon......

[tazdev]

Originally posted by Moppie


Theres no such thing.
The 3 chairs I have here, are all differnt hights. It depends on where it was manufactored, and what sort of chair it was from.

so you need the compressed length then I take it?

[Raging Bull]

hmm, could probably do with a new one. A bit tatty!

[Rich]

No pic, but its an old kitchen chair.

Its.....

• Too narrow
  Too short
  Poor arms
  Crappy back support
  No wheels
  No adjustibility at all...