|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-20-2011, 04:37 PM
|
|||
|
|||
|
engine information needed
HI, I am in the Dallas TX area and I am looking for someone who has a V12 engine out that I could get some measurements from. I need the bellhousing bolt pattern and crankshaft dimensions. If anyone can help me or if you might know where I could find a CAD drawing with this information I would really appreciate it. Thank you
|
|
#2
02-21-2011, 11:48 AM
|
|||
|
|||
|
Re: engine information needed
For what model year?
__________________
1990 E32 750iL --> Pictures Production: 02/1990 Johan and Sean's E32 Page - Repairs and How-to's E38.org - Information and tech tips for BMW's Shogun's E32 Tech-Tips Gale's Repair Page ETK Online
|
|
#3
02-21-2011, 12:23 PM
|
|||
|
|||
|
Re: engine information needed
Quote:
My customer's engine is an '89 model. I am making an adapter to use a different transmission with this engine. I don't know much about BMW engines. Are all of the V12 bellhousings the same?
|
|
#4
02-21-2011, 12:30 PM
|
|||
|
|||
|
Re: engine information needed
I do believe that from 88-94 (known as the "E32") the transmissions were the same transmission. The V12 engine design changd a little after 92/93, mostly cosmetic, but I'm not sure if the bell housing is the same or not. Transmission is a ZF 4HP22. I'll do a bit of digging and see what I can come up with.
The E38 (95-02) were a bigger V12, 5.4L instead of 5.0L in the E32, and the transmission is a ZF 5HP24 I believe. 2003 and newer I have no idea. I do believe they kept with the ZF transmission but I could be wrong. But the E65/66 (03-10) were a 6.0L V12.
__________________
1990 E32 750iL --> Pictures Production: 02/1990 Johan and Sean's E32 Page - Repairs and How-to's E38.org - Information and tech tips for BMW's Shogun's E32 Tech-Tips Gale's Repair Page ETK Online
|
|
#5
02-21-2011, 12:37 PM
|
|||
|
|||
|
Re: engine information needed
Quote:
Thanks, This engine is an M70 from a 750il. He is building a Lamborghini replica and I am making an adapter to use a Porsche transmission with this engine. I have found an engine locally that I can take measurements from but I was concerned about whether all of the V12s are the same bellhousing and crankshaft bolt patterns. I will take measurements and send to my customer to compare to his engine before I make the parts.
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
