Problems after b16a swap - Page 2

SiRII · #16 05-13-2003, 06:14 PM

if i post pics. then so do you?

crxlvr · #17 05-13-2003, 10:04 PM

ill post pics whenever you want em.

B16EJ1 · #18 05-13-2003, 10:35 PM

No pics yet huh? I guess he's having trouble changing the oil.

SiRII · #19 05-13-2003, 11:46 PM

that sucks. i took 16 pics and only 6 are working. it did the same shit yesterday.

crxlvr · #20 05-14-2003, 09:36 PM

so post those six, i dont care if its a picture of your house.

SiRII · #21 05-14-2003, 10:07 PM

My Mods.

crxlvr · #22 05-14-2003, 10:24 PM

your mods include the picture of someone's engine bay, thats real hard to find on the web.

i can take a pic of any cars engine and slap it up here and say its mine.

i think you really need to take a pic of you next to "your car" with a teddy bear in it, so we know its you and not some pic u found on the net.

and if that is your engine, name some of the parts you put on it.

SiRII · #23 05-14-2003, 10:31 PM

it's all at the top of the My Mods. thread http://www.automotiveforums.com/vbulletin/t102910.html

rosman4u · #24 05-15-2003, 01:26 PM

Quote:

Originally posted by SiRII
he should of had someone who knows what they are doing to do the swap for him in the first place.

Thx for the negative reply and for your information the guy who did the swap is well know in the area for doing swaps, he has done 12 to date on 92-up civic and tegs ranging from b16's to H22's, this guy is my brother, including his car which is a 96 hatch w/ 1.8 b18 gsr motor & custom turbo install running 5 psi currently (if you don't believe me I'll be more than happy to provide pics, his car is part of massivemotorsports.com club). I'm not trying to show him off just proving the point this was done with someone with much experience. Unfortunately I seem to be the only EF civic with a b16a or at least the first in SW florida, most swaps are done on crx si's or 92 up hatch, at least so far in this area and this is his first ef civic swap. He unfortunately cannot work on my car this week since he doing some work on his ride for the nopi show in Brandenton, FL. this weekend so I was hoping to get some stuff done on my own by asking for help as many from these forums have provided, thx for the one's with positive feedback, I appreciate your help guys.

To give you guys the status I have changed the ignitor, ignition coil and still no spark. Please let me which are all the ground wires on the b16a, I know one for the battery which connects to the tranny and the other ground cable which connects to the valve cover. Is there any other I should watch for? I can't believe my distributor is bad after changing the ignitor and ignition coil and still no spark, I will order another distributor if all else fails, please let me know what this could be. I appreciate any info.

SiRII · #25 05-15-2003, 01:42 PM

what about the starter? is that good?

rosman4u · #26 05-15-2003, 04:45 PM

yep, so far its cranking fine, just no spark. I've been told to recheck my wire harness ground to starter and make sure its grounded, guess I check that cause from what i know there are 2 grounds so far, the batter ground which is connected to the tranny bolt, and the valve cover ground.

SiRII · #27 05-15-2003, 04:48 PM

double check all connections.

crxlvr · #28 05-15-2003, 06:11 PM

i believe there are a few more grounds from the alternator, and the intake manifold, but im not sure on that one.

SIRII, i still cant believe you man, just cuz you can write a bunch of shit down on a web-board doesnt prove to me that you have this stuff.

i can make a list that pro drivers would drool about and say i had it all, im still raising the BS flag on you man.

POST REPLY TO THIS THREAD