How to reset "Service Engine Soon" light

[vipercarcom]

Hello all, if you want to know how to reset service or oil warning light for eny car on the market on that can do this I recommend you this site Reset service light, reset oil life, maintenance light reset

From here I inspired myself for my cars.

Quouted from the above URL:

Reset oil service light Chevrolet GMC Trucks C Series. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset oil service light Chevrolet GMC Trucks C Series. From years: 1999, 2000.

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the light flashes 2 times the system is reset.
If the light comes on and stays on for 5 seconds the system did not reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.


How to reset oil service light Chevrolet GMC Trucks C Series. From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007.

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the Change Oil Soon light flashes the system is resetting.
Turn the ignition off and then start the engine to verify the indicator has been reset.


Full procedure how to reset oil service light Chevrolet GMC Trucks C Series. From years: 2008, 2009, 2010.

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC (i button).
If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
Press and hold the SET/RESET (arrow) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds.
The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset. or Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
Display the OIL LIFE REMAINING on the DIC to verify it is at 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

[DMC12]

I've updated the URL in the above post. It went to the homepage instead of Chevy truck page. Also, I've copied the instructions off that page - in case members wish to avoid such an ad-heavy site.

[vipercarcom]

Thank you DMC12, sorry for bad url. Good job!

[Tech II]

What does this all have to do with a SES light?

[Schurkey]

Originally Posted by Tech II

What does this all have to do with a SES light?

Not a thing. Some folks got confused, and derailed the thread.