|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-07-2012, 08:57 PM
|
|||
|
|||
|
broke a stud on exhaust flange 2 of 3 left do I need to do something about it. what is the torque for the bolst
94 pickup 22re. replaced the header pipe 2 nuts a bear to get off and broke one of the studs in trying. Put the new pipe on, looks good and tight, sounds good for now. Any one know if it will definately start leaking? or if so how soon. could I clamp it? with what?
What is the torque for the nuts on that? Thanks 
|
|
#2
02-12-2012, 02:49 PM
|
||||
|
||||
|
Re: broke a stud on exhaust flange 2 of 3 left do I need to do something about it. what is the torque for the bolst
It's bound to start leaking, hard to say when.
I couldn't find torque spec for the exhaust system, but a standard M10-1.25 bolt is 19 ft-lb and a M12 is 35 ft-lb.
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata
|
|
#3
02-12-2012, 07:04 PM
|
||||
|
||||
|
Re: broke a stud on exhaust flange 2 of 3 left do I need to do something about it. what is the torque for the bolst
Torque is 33 ft-lbs for head to manifold nuts.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate"
|
|
#4
01-03-2014, 01:34 PM
|
|||
|
|||
|
Re: broke a stud on exhaust flange 2 of 3 left do I need to do something about it. what is the torque for the bolst
Update.
It was not a good time to try and remove the broken stud I found a c clamp that fit up there and was able to torque it pretty tight and it is still there LOL. When the weather warms I plan to try and fix it right.
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
