What do I need to hold cone on turbo?

[Cavalier9696]

K guys been trying to find something to hold the pipe that my cone goes on to turbo. The rubber boots don't work, of course they melts in half. There some kind of flange I can use? But I need something to fit this.

[Blackcrow64]

You must not be using good ones if they are melting... Here are the ones I am using on my car and it is right on the turbo like you want to do. Hundreds of miles and many hard pulls and no melting for me. I suggest getting the t-bolt clamps with it. Best clamps to use for this kind of thing.

http://www.extremepsi.com/store/home.php?cat=1533

[Cavalier9696]

Originally Posted by Blackcrow64

You must not be using good ones if they are melting... Here are the ones I am using on my car and it is right on the turbo like you want to do. Hundreds of miles and many hard pulls and no melting for me. I suggest getting the t-bolt clamps with it. Best clamps to use for this kind of thing.

http://www.extremepsi.com/store/home.php?cat=1533

The boots I got where the ones from autozone. So ya they may not of been to good.

[david-b]

AutoZones hoses aren't even silicone. Some 3+ layered silicon work great. Never had any problems with them. A T-Bolt clamp will work perfect to hold it on.

[ned032002]

+1 to Brian, STM also has a nice selection. Check out http://www.siliconeintakes.com/ I've bought from them a couple times and had awesome luck with there products.