CV Axle stuck in trans...

[Scrapper]

Originally Posted by speediva

So it's not just leaking under load, but leaking with just being "put back together"?

are you sure the half shaft was same length and have you talk to a dealer for parts and see if they had trouble with them? and see if they call for 2 diffirent seals?

[autotech234]

It will come out. just don't give up. A quick jolt with a pry bar usually will do it. If that dont work its time for the air hammer, and if its really stubbor you can use both at the same time with 2 people. It will come.

[Scrapper]

Originally Posted by Scrapper

are you sure the half shaft was same length and have you talk to a dealer for parts and see if they had trouble with them? and see if they call for 2 diffirent seals?

i've tryed this before if you can get a small pipe wrench behid c/v joint the smack it with a hammer it should come right out.

[speediva]

Folks, the problem of getting the axle out was solved quite a few posts ago. The problem now is that the car still has a leak.