Just beginning need info - Page 2

wnt2gofst · 04-09-2009, 04:00 AM

Could not find Iceman Intake. Lots of others on neons though. Which ones should i stay away from? what is the next best? What others would you recommend?

1997-Dodge-Neon · 04-09-2009, 10:17 AM

What if you use a 60mm Throttle Body?

das2123 · 04-09-2009, 12:33 PM

Next best is the 3.0L intake. No one makes an intake that puts the filter in the front of the car. They all rest over the exhaust manifold(HEAT).

What do you mean, what if you use a 60mm TB?

1997-Dodge-Neon · 04-09-2009, 02:58 PM

Thank You. Someone thinks like I do. Great minds think alike...

wnt2gofst · 04-09-2009, 10:03 PM

3.0L intake off of what? What kinda work is involved and where do i get one? thanks again for the info.

das2123 · 04-11-2009, 05:25 PM

Quote:

Originally Posted by wnt2gofst

3.0L intake off of what? What kinda work is involved and where do i get one? thanks again for the info.

On any 80's Dodge 3.0L engine. You take the intake tube off of it and use it. Depending on what type of radiator fans you have, you may have to cut the tube and use some exhaust pipe to extend the tube. You will also have to cut/modify your battery tray to allow the pipe to pass through. Below is what you would need to look for in the junkyard.

wnt2gofst · 04-16-2009, 10:38 AM

Thanx for the pic and the info. i'll start hunting.

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD