|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
07-17-2007, 10:30 AM
|
|||
|
|||
|
HB removal tool for 94 Lesabre 3.8
Can anyone reccomend a removal tool for the harmonic balancer on a 94 3.8 LeSabre? There are not threaded holes on the hub where I can bolt the puller on. I've been to three different auto parts stores and they all give me a dumb look and a tool that won't work. I don't want to try to use a puller that will grab it from the outside for fear of damaging the damper. My assumption is that there is either a special tool, or there was too much rubber put on the front of the hub where the hole are. One note, there are three slots that go through the hub. All this trouble in an effort to replace the crank position sensor.
Thanks, Roger 
|
|
#3
07-18-2007, 06:14 AM
|
||||
|
||||
|
Re: HB removal tool for 94 Lesabre 3.8
This thread has been moved to the regular Buick LeSabre forum. The Tips & Maintenance forum s intended for exactly as stated and not this type of issue.
__________________
'08 Pontiac Grand Prix GXP (Dark Slate Metallic) - LS4 5.3L V8 '02 Oldsmobile Alero GL2 - LA1 3400 V6 '99 Buick Regal LS - L36 Series II 3800 V6 '03 Honda CR250R MX - 2 Stroke 250cc '97 Pontiac Grand Prix GTP - L67 Series II 3800 V6 Supercharged (Sold) Timeslip 08/12/06 AF Community Guidelines
|
|
#4
07-18-2007, 08:33 AM
|
|||
|
|||
|
Re: HB removal tool for 94 Lesabre 3.8
Napa did not know what I needed. Maybe it was just the guy at the counter. I've sent a message to the NAPA tech help. If I could figure out how to insert a photo, I could post it, otherwise, if anyone would like to see this photo of the balancer. Send me a PM to [email protected]. Thanks again.
|
|
#5
07-18-2007, 10:09 AM
|
||||
|
||||
|
Re: HB removal tool for 94 Lesabre 3.8
Click Here for the info you need
__________________
Knowledge can be communicated, but not wisdom!   
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
