Carb Suggestions?

72' Stang 351 H/O · 05-10-2007, 07:09 PM

Most of you know I have a Mustang 351 Cleveland blah blah blah 4V intake and such. Me and Dad are going to be throwing performance upgrades at this thing. It's normal operation range is from idle-5600 rpm's. Has a C-6 3 speed. I want to know the best cfm carb. Most likely it's getting full exhaust,edelbrock heads,a mild cam,edelbrock intake or a weiand intake,new distributor, basicly the works. I suck at knowing the best carb for such an build. Also if anyone had a cam idea i'm open to suggestions. Thanks.

351wStang · 05-11-2007, 01:14 PM

I'd call comp or crane for the cam, and run a 650 Holley dp carb.

72' Stang 351 H/O · 05-11-2007, 03:44 PM

Quote:

Originally Posted by 351wStang

I'd call comp or crane for the cam, and run a 650 Holley dp carb.

I checked that out. It only has manual choke my dad's car is electric.

SkylineUSA · 05-11-2007, 04:10 PM

650, depends on the cam. 600 or 700 might work as well, but there are variables

351wStang · 05-12-2007, 11:40 AM

Quote:

Originally Posted by SkylineUSA

650, depends on the cam. 600 or 700 might work as well, but there are variables

Almost anything can be tuned

.
Just fyi my carb doesnt even have a choke.

SkylineUSA · 05-13-2007, 01:38 AM

Quote:

Originally Posted by 351wStang

Almost anything can be tuned

.
Just fyi my carb doesnt even have a choke.

Or Horn for that matter

351wStang · 05-14-2007, 06:47 AM

Quote:

Originally Posted by SkylineUSA

Or Horn for that matter

This is true.. but I do have a BOV that makes this really cool sounds after my WG gets to do its thing!

POST REPLY TO THIS THREAD