![]() |
![]() |
Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
![]() | ![]() | ||
![]() | ![]() |
| Latest | 0 Rplys |
|
![]() |
![]() ![]() ![]() |
|
Thread Tools |
![]() |
#1 | |
AF Newbie
![]() Join Date: Feb 2006
Location: Buffalo, New York
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]()
How do I program my new remote to open the doors on my 1996 Roadmaster wagon?
|
|
![]() |
![]() |
#2 | |
AF Regular
![]() Join Date: Feb 2006
Location: Burbank, California
Posts: 177
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
Try this procedure, which is posted in this forum.
http://www.automotiveforums.com/vbul...63&postcount=5 |
|
![]() |
![]() |
#3 | ||
AF Newbie
![]() Join Date: Feb 2006
Location: Buffalo, New York
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
Quote:
|
||
![]() |
![]() |
#4 | |
AF Regular
![]() Join Date: Feb 2006
Location: Burbank, California
Posts: 177
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
I poked around and found this link that might be helpful in locating the plug:
http://impalassforum.com/cgi-bin/ult...;f=20;t=002605 Good Luck! |
|
![]() |
![]() |
#5 | |
AF Newbie
![]() Join Date: Feb 2006
Location: Buffalo, New York
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
Thanks, I'll take a look. Ken
|
|
![]() |
![]() |
#6 | |
AF Newbie
![]() Join Date: Feb 2006
Location: Buffalo, New York
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]()
Thanks for all the help! I got it done.
|
|
![]() |
![]() |
#7 | |
Authorized Vendor
![]() Join Date: Sep 2003
Location: Keyless Entry Remotes
Posts: 741
Thanks: 0
Thanked 8 Times in 8 Posts
|
Re: Roadmaster remote program
If you push aside the molding on the rear driver side pillar post (just behind the rear window) you will find a small black circuit for initializing the keyless remotes. Take some copper speaker wire & bridge the two metallic nodes (completing the circuit). When this is done, you will notice the door locks will begin cycling automatically - click one button on each remote sequentially and the system, in turn, will store the code for each remote. Remove the wire & put the molding back in place - you're done.
__________________
Replacement keyless entry remotes available here - up to 90% off - All makes/models from Acura-Volvo, 1988-present - http://www.OriginalKeyless.com |
|
![]() |
![]() |
#8 | |
AF Newbie
Join Date: Feb 2005
Location: Lakeland, Florida
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
One of my remotes quit working-put in new batteries-no luck-any typical problems to look for? Could one of the remotes have become "unprogrammed"?
Also, is there any way to add a "horn beep" or any other features to the programming? TIA, Ben III |
|
![]() |
![]() |
#9 | |
AF Newbie
![]() Join Date: Feb 2006
Location: Buffalo, New York
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
My problem was that I only had one remote and I wanted to program another. In doing that I did program both of them. Try reprogramming both. As far as the beep, if the manual does not refer to that you probably can't. But, someone may have a way to do that. Good luck, Ken
|
|
![]() |
![]() |
#10 | |
AF Newbie
Join Date: Feb 2007
Location: Houston, Texas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
I have a 94 Roadmaster sedan and I can't find the "Plug" in my trunk. Can somebody post a picture of what I'm supposed to be looking for?
|
|
![]() |
![]() |
#11 | |
AF Newbie
![]() Join Date: Feb 2006
Location: Buffalo, New York
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
I have a Wagon, but, the "plug" is actually a receptacle. It's black plastic with two wires and there are two slots for a connecting plug. And, there's no "plug" to go into it. On the sedan, it should be behind the panel on the drivers side of the trunk. It's about 3/8 inch square and 1 1/2 inches long. Try some of the links in the other replies, especially the Impala Club link. Don't give up, Ken
|
|
![]() |
![]() |
#12 | |
AF Newbie
Join Date: Feb 2007
Location: Houston, Texas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Roadmaster remote program
Thanks man. I'm gonna try to find a picture cause I think my plug might be missing. Like there's a wire that was cut or something. I hope it's not for the release.
|
|
![]() |
![]() |
#13 | ||
AF Moderator Elite
![]() Join Date: Feb 2005
Location: Gilligan's Island, Florida
Posts: 5,763
Thanks: 87
Thanked 72 Times in 72 Posts
|
![]()
Quote:
If you like, you may start a New Thread on this subject. This thread is over one year old, so therefore, it will be closed. Click Here and read. Thanks for your cooperation. ![]() ![]()
__________________
Knowledge can be communicated, but not wisdom! ![]() ![]() |
||
![]() |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|