|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#16
05-04-2006, 03:46 PM
|
|||
|
|||
|
Re: 2.73 or 3.23?
another way to determine gearing from what i read was place a mark on the drivershaft and housing and have someone turn the rear wheel, count how many times the drive shaft turns and crosses the mark...2.75 turns = 2.73 gears, over 3 turns and you know you got 3 something gears!!!
|
|
#17
05-04-2006, 09:47 PM
|
||||
|
||||
|
Re: 2.73 or 3.23?
Like was mentioned Glove box doors on 95 is where the rpo's are and another easy way is to just open her up and look on the side of the ring gear.
__________________
RIP Hypsi - I just want to express I will never be the same after having lost such a good friend. You meant alot to me and I feel I am a better person for having known you. Til the day we meet again my friend you will always be in my heart. Mods: Weight reduction (I don't wear underwear)
|
|
#18
05-04-2006, 10:46 PM
|
|||
|
|||
|
Re: 2.73 or 3.23?
allright well I found the codes, I hadn't thought to look on the actual door of the glovebox
 anyway yeah I have the GU2 so i guess i got the 2.73's..oh well when i decide whether to engine swap on the car or just modify i can always get some new gears 
|
|
#19
05-04-2006, 10:49 PM
|
||||
|
||||
|
Re: 2.73 or 3.23?
You will need to step up to a 3 series carrier or used special 2 series gears (made by richmond or strange) is you use gears ratios higher than a 3.08
__________________
RIP Hypsi - I just want to express I will never be the same after having lost such a good friend. You meant alot to me and I feel I am a better person for having known you. Til the day we meet again my friend you will always be in my heart. Mods: Weight reduction (I don't wear underwear)
|
|
#20
05-06-2006, 03:01 PM
|
||||
|
||||
|
Re: 2.73 or 3.23?
Quote:
Screw the gears, just get a good torque converter!
__________________
DarkblueTA GT70, FMIC, Alky-water injection, Hooker Cat back, 208/230 .549/.579 121LSA Cam, forged diamond pistons/eagle rods, LS6 block, Lakewood LCAs, BMR STB/PHRB/Sway Bars, poly torque arm bushing, Spec Stage 4i clutch, B&M Ripper Shifter, SLP Subframes, 60# injectors, KYB AGX shocks/struts, Moser 12 bolt(373 gears, 33 spline axles, posi, ta girdle/etc/etc/etc) and HPTuner kit 2007 Nissan Titan Daily Driver. 2* advance 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
