92 teg head on 91block???

[91tegra]

will a 92 integra head fit on a 91 integra block? if so will the 91 drive train(cams, springs, valves,) fit in a 92 head

[90CRXZCSi]

Of course. Everything is a direct bolt up. 90-93 is all the same. i think even the 94+ are the same.

[shadowboy]

there are minor differences.. but putting a 92 head in your 91 engine will give you a small boost in power (the 92 teg is rated at 140HP vs. 130 for the 91).

i don't think you will see all of the 10 ponies, there may be differences in the bottom end that account for some of them... but still.. most of it will probably be from the head so i would say expect a 7-8HP gain or somewhere around there

[Rgacke]

I'm absolutly positive the only diff is in the head, if you can get a good deal on one go for it, make sure its complete and includes the intake manifold. That way you'll have the same base line as the rest of the later tegs, don't pay more than 400 but be patient and look around and it can be had for cheaper.

[91tegra]

i am going to get a 92 head from some guy for 150.00 it has the distributer and the intake manifold but it does not has the springs, valves,cams or anything else. but that is no big thing because all that stuff is going to be all new, so hopefully the sale will go good.

[RedRocketGSR]

Your gonna end up putting alot of money into it by replacing the head and having to buy springs, cams, etc. Why didnt you just stick with your old head and build that up?

[91tegra]

truthfully i really did not need the complete head. i just needed the distributer but if he was going to sell me the whole head for cheap then why not pick it up? so now i will have an extra head just incase something were to happen to my other motors head.