|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#16
09-19-2005, 04:59 PM
|
|||
|
|||
|
Re: 2000 Gc Ecm
i do have a multi meter and know the basics of using it
|
|
#17
09-19-2005, 05:08 PM
|
|||
|
|||
|
Re: 2000 Gc Ecm
actually theres really not much to it...i could definitely use it to do what i will need to do to check the TPS
|
|
#19
09-19-2005, 07:40 PM
|
|||
|
|||
|
Re: 2000 Gc Ecm
its the 4.7L. also, do you know where the ECM is located? i know there were a few loose bolts in it before that were giving it problems......i want to see if they are loose again.
|
|
#20
09-20-2005, 08:51 AM
|
|||
|
|||
|
Re: 2000 Gc Ecm
if the tps is suspect, its about $30 and very easy to replace but look at this link and you should be able to test it and get an idea what shape it is in.
http://minimopar.knizefamily.net/fault/code24.html
|
|
#21
09-20-2005, 09:10 AM
|
|||
|
|||
|
Re: 2000 Gc Ecm
|
|
#22
10-01-2005, 09:16 PM
|
|||
|
|||
|
Re: 2000 Gc Ecm
thank you very much. that was quick and easy, and the vehicle seems to be running much better. i took it out for 20min or so and it didnt "crawl" up the hills at all. the whole throttle body was VERY dirty. i have one more seemingly small problem. the only time anything goes wrong is when im on the highway and i put the pedal to the floor. the RPM's go about to 4 or 5, but the vehicle doesnt go over 60...it seems like it wont downshift. also, when i begin to accelerate, there seems to be a slight hesitation at times before it jerks into motion. do you think it has anything to do with the throttle position sensor? because when i had that out and i was cleaning it, i may have turned the bottom part of it that is not supposed to be turned. if so, i will buy a new one asap, i know they are moderately cheap. also, i have not disconnected the battery since i reassembled everything, so maybe the computer just needs to be reset?
oh, and one more thing..it might be possible that i did not put the accelerator cable or the one for the speed sensor (?)back on correctly bc it was getting dark when i was throwing everything back together... i think i must have or i would have more problems than that. thank you soo much for all of your help. after the vehicle sat there for a few months, i finally had it up and running....and it only took about a half of an hour to fix.
|
|
#23
10-01-2005, 09:17 PM
|
|||
|
|||
|
Re: 2000 Gc Ecm
oh, and thank god i didnt go and buy a computer. where is it located in that vehicle anyway?? i have the 4.7L engine.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
