4 headlight mod

[silveradoking]

20-16 or even 14 gauge.....

[airtight_python]

Thanks

[Shortbus]

This is truely a great mod and should be stickied.

[silveradoking]

but....ehhhhhh.....have you tried the fog, drl, low and hi altogether on mod?

[airtight_python]

I'm not one who could say I've done that. From the looks of the instructions I don't even know if I'd want to attempt it. It would be pretty awesome though.

[BlenderWizard]

so, the low beams are not supposed to stay on with the high beams? the previous owner must have modded mine, then.

[airtight_python]

Nope, factory settings do not keep the lows on when you switch to high. Must be modded!

[BlenderWizard]

cool, saves me the trouble, then

[BlulytesTB]

Anybody know if this will work on a 03 Tahoe? I would think it so...

[airtight_python]

03 is a little more difficult from my understanding. Search around and I bet you'll find it. The module from Stylin Concepts for the 03 up models is even a buttload more!

[BlenderWizard]

Originally Posted by brandon_rip84

I'm going to attempt the 4 headlight mod. I'm wondering what gauge of wire that one to be grounded is so I know what size taps to get. I'd rather ask then pull everything apart before I actually do it. Thanks

I used a 16-14 gauge tap I got at advance autoparts, and some 16 gauge yellow wire I got there, too.

[airtight_python]

Gotter done Blender... Used a 22-16 AWG quick tap and some 18 AWG wire to ground with. Even went all out and soldered the terminal! (Woohoo) I like the output though. I used to drive around holding the high/low switch back, wishing they were that bright. Well I'll be, they are that bright! Thanks for the input.

[gcutter]

Originally Posted by silveradoking

but....ehhhhhh.....have you tried the fog, drl, low and hi altogether on mod?

Yes, I have done it on a 2003 2500HD. Makes offroading at night like daylight. It can be all done in the under the hood fuse box using diodes.