SCAMMER ALERT! DO NOT Buy from doug294!!!

[Juicy05]

You can see it from plain view in a picture that it has buildup....

[88ReX]

Ok I could see how its possible that some people might not noticed its off visually on the flange part. When placed on a flat surface it would become obvious. But you can't tell me, doug, that you didnt at least hold the t28 up to the flange to see if it fit.

BUY HER A NEW MANIFOLD! Because you obviously, knowingly, sold her a fucked up manifold.

[doug294]

Um as stated I didn't see pictures when I said that. I can't really say I care for you attitude now. I am trying to work with you now that I have seen proof yet you still act like a 13yr. What the crap did you expect me to do just say ok I don't need to see pictures here is a $150. yeah right get real

[amy@af]

Originally Posted by doug294

Hey as far as I knew the turbo was brand new. Never stuck my finger inside and to me it looked new.

LIAR! looking back on your pics you can tell it's dirty with the other side of the turbo up. my fingers were dirty from just picking it up.

Originally Posted by doug294

As far as the turbo no matching up I never put them together to check. Held them seperately, but never matched all the parts up.

i don't buy that either. it is obvious without matching it up

Originally Posted by doug294

You asked how I "conv" didn't take puictures of the head side. Why would I?

exactly....why would you take a warped pic

Originally Posted by doug294

Anyways, like I said I have contacted the place I got it from to see what they say. It looked straight to me, but your pictures show it off. You get all offensive and act like you are so pissed yet you just now post proof after posting the thread with none.

i have EVERY RIGHT to be pissy. i come to you very nice thru pm's and you start popping off smart ass replies.




you really should stop repling, you build more and more of a case for me. no really reply again how you and your friends held it many of times........
didn't know it was used....didn't know the flange didn't match up

[doug294]

Originally Posted by 88ReX

Ok I could see how its possible that some people might not noticed its off visually on the flange part. When placed on a flat surface it would become obvious. But you can't tell me, doug, that you didnt at least hold the t28 up to the flange to see if it fit.

BUY HER A NEW MANIFOLD! Because you obviously, knowingly, sold her a fucked up manifold.

WTF do you know. You know nothing freaking about me. Yeah your right, I sit and play with my parts all day putting them together wishing they were on my car. STFU about something you know nothing about.

[doug294]

No thats where your wrong. You come to me demanding money back with no proof. If you would have showed pictures I would have been like WTF that comapny screwed my crap up. No you keep demanding and make a thread to try to act like I am a scammer.

[doug294]

As far as the turbo being dirty. I figured it was the coating on the exhaust side of the turbo. I didn't check the inside. It comes off on the outside on the exhaust side.

[amy@af]

Originally Posted by doug294

Um as stated I didn't see pictures when I said that. I can't really say I care for you attitude now. I am trying to work with you now that I have seen proof yet you still act like a 13yr. What the crap did you expect me to do just say ok I don't need to see pictures here is a $150. yeah right get real

don't like my attitude? all the replies YOU MADE of how my friend screwed you, all your little sarcastic replies. my friend recieved not 1, not 2, but 3 parts not as they were depicted and when i approach you i get an attitude of it's all our fault. no apology. you didn't try to work with me until i made this public thread.

acting like i'm 13? try looking in the mirror. i post up pics and you are still making excuses...which in case nobody told you are lies. you grow up. what you want an e-cookie for contacting the company? that was AFTER i posted here. i believe you contacted them before i posted as much as i believe you didn't notice the turbo was used.

you tried to scam my friend. each and every reply you leave is making it more and more clear

ANYBOY HERE SEE ANY REASON WHY I SHOULDN'T BE PISSY?????

[amy@af]

doug294, your avatar has been removed. that was a direct violation of AF's rules, the rules you must agree to before you can register.

[Jetts]

lol

[dmbrisket 51]

Originally Posted by LadyNRedSi

ANYBOY HERE SEE ANY REASON WHY I SHOULDN'T BE PISSY?????

ah, and i see it is located in the main section, ot and fs, thats just being a bitch... i think im turned on, i mean with all the screwing of people being done in this thread (dont worrie thats ment more at one then the other)

[4thgenracer]

you suck doug

[ci5ic]

Okay...

Seriously doug, don't even say that you ordered all these pieces seperately over the course of 2 years, and didn't check them to see if they matched up. Nobody's trying to say that you "sit and play with your parts all day putting them together wishing they were on your car", but I'd be way surprised if you didn't at least CHECK the fitment briefly. Especially since you said that you and your friends have held and inspected the parts numerous times, at least ONE of you would have noticed the difference in the turbo flanges, a detail that wasn't in your post when you advertised these items.

As for the warped turbo manifold flange... I think you probably would have noticed that too, and if FedEx fucked it up, you can be that whatever box it came in would've shown some serious damage, and anyone with half a brain wouldn't have signed for it on reciept.

Sounds like Ami has done everything she should have in this issue by trying to contact you multiple times about it before starting this thread. Now, I don't know you personally, but I've known Ami for several years and met her in person a time or two, and I can tell you she's not a scammer...

Sounds pretty jacked up to me dude.

[CBURKE]

ok, wow.......
I'm am gonna say, do you think someone may have droped it? That is the only way it could be that bad. How well was it packegd? I think i know, someone droped it. It don't get warped like that from some one putting it on. Just something to think about.

[doug294]

Originally Posted by LadyNRedSi

doug294, your avatar has been removed. that was a direct violation of AF's rules, the rules you must agree to before you can register.

My avatar you idiot was a womans hand on a mouse. If you would pay a little more attention you would have noticed that.