|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#16
|
||||
|
||||
|
Re: Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
Quote:
__________________
I have P.M.S. and a gun. Excuse me, you have something to say? What's wrong with abstinence?
|
|
#17
|
||||
|
||||
|
Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
you can do anything with money.
the main issues would be space because i dont know how to fit a 3 rotor engine in the space of a v6, you may be able to idk, and you would have to relocate the alternator and starter, and find a transmisson that would work (that is fwd and can hold the 20b's power). thats all i can think of.
__________________
RX-7 TII |
|
#18
|
|||
|
|||
|
me and my pops were talking and we were talking about droping a honda h22 motor in there and put a turbo it will then make the car from 4000 and drop it down to the low 3000, because the motor weighs so much would this be possible and how much would it cost for the whole nine yards, and thanks for helping me everywhere else i go i get ignored
|
|
#19
|
||||
|
||||
|
Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
you should try the honda section of the forums
|
|
#20
|
||||
|
||||
|
Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
Quote:
the engine doesnt weight that much |
|
#21
|
||||
|
||||
|
Re: Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
Quote:
__________________
I have P.M.S. and a gun. Excuse me, you have something to say? What's wrong with abstinence?
|
|
#22
|
||||
|
||||
|
Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
do urself a favor and nuy a cheap ass rx and start from there, u could get one for like a 1000 just to start with. and it will outhandle a 626 by farrrrrrrrrrr.
__________________
88 10th anniversary rx7 and company h2. ![]() [IMG] [/IMG] [IMG]atkins streetported 3mm seal engine, act clutch, lightweight flywheel, downpipe, straightpipe, greddy power extreme exhaust, hks ssqv blow off valve, short shifter, tein flex suspension, energy bushings, bonez intake, new brakes, rotors, toyo tires, mazdaspeed replica seats |
|
#23
|
||||
|
||||
|
Re: Re: Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possi
Quote:
__________________
RX-7 TII |
|
#24
|
||||
|
||||
|
Re: Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
Quote:
the 20b was a three-rotor engine, used only in the unos cosmo... full size 4 door sedan, never imported to the states for sales, about 9000 20b's were put into them. 2.0L (approx) displacement 285hp, twin turbo... (stock trim) engine with LOTS of potential, but good luck finding one, and good luck funding the install... but, if you could get it together, you'd have a beast on your hands... as far as swapping a rotary into a 626, no ... the rotary doesn't belong in a FWD car. i believe there is a 20b front clip for sale up on ebay .. check it out |
|
#25
|
||||
|
||||
|
Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
they're not that rare
they're sold for 2k$ ++ and needs a rebuilt, wich is 150% the price of a 13b rebuilt, and need custom fab to be fitted in a 13b car, and some shop do the job for 30k$ garanteeing you 500 whp |
|
#26
|
||||
|
||||
|
Re: hey i have a 99 626 V6 would an RX-7 motor be a good swap and is it possible?
youre acting as though there was never a fwd rotary car made. btw the name is Eunos Cosmo and it is a 2 door car. 20b's arent really rare
__________________
RX-7 TII |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|