d15b all motor setup.

[turtlecrxsi]

Originally Posted by GReddy07

hey do you 2 know what your talking about yo! Std dome pistons in which they are not oversized!! so before you mouth off get your facts straight. Just in case your dumber than you look I mean they are standard size just the stock sized piston but domed and yes i know the d15 came stock with flat top!

So you're using dome top pistons in a d15b2 block and you will soon have a vtec head on. Well that sounds pretty decent. DPFI isn't helping you much though even with high compression... BTW, don't be an ass... we're just trying to decipher what you're saying.

[doug294]

Originally Posted by GReddy07

hey do you 2 know what your talking about yo! Std dome pistons in which they are not oversized!! so before you mouth off get your facts straight. Just in case your dumber than you look I mean they are standard size just the stock sized piston but domed and yes i know the d15 came stock with flat top!

First off you are the one saying STD pistons. On here that would be pistons out of a standard civic. Second why didn't you just say stock bore pistons or just domed pistons?

What brand pistons are they? What c/r are they? Are you using stock rods? What piston rings did you use?

[doug294]

Originally Posted by turtlecrxsi

So you're using dome top pistons in a d15b2 block and you will soon have a vtec head on. Well that sounds pretty decent. DPFI isn't helping you much though even with high compression... BTW, don't be an ass... we're just trying to decipher what you're saying.

I'm calling BS on this guy. Why do all the trouble doing those mods when the first obvious one would be MPFI.