-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Engineering/ Technical
Register FAQ Community
Engineering/ Technical Ask technical questions about cars. Do you know how a car engine works?
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 03-20-2005, 08:02 AM
INF3RN0666 INF3RN0666 is offline
AF Regular
 
Join Date: Jul 2003
Posts: 324
Thanks: 0
Thanked 0 Times in 0 Posts
Engine heats up too fast

I drive a 1995 Eagle Vision ESi 3.3L(part of the LH series --> Intrepid, Concorde, New Yorker). Let's assume I turn on the car, let it warm up for 2 minutes and then drive 10 kilometers. The car will indicate that the engine heat is halfway on the gauge (there's no digits on the gauge :S, how retarded is that). Taking my dad's 2000 Impala 3.8L through the same route, the gauge reads one third. I tried the 1993 Cavalier 2.2L under the same conditions, and the gauge reads one third. Why is it that my car warms up much faster than the other two. This is the last thing I want happening in the summer, where temperatures are 35+ degrees ceclius. BTW, I know that the cavalier has a shit v4 engine, but even the impala with the larger engine warms up slower. What could be faulty? Is the thermostat opening too late?
Reply With Quote
  #2  
Old 03-20-2005, 11:29 AM
MagicRat's Avatar
MagicRat MagicRat is offline
Nothing scares me anymore
 
Join Date: Dec 2003
Posts: 10,702
Thanks: 12
Thanked 82 Times in 77 Posts
Re: Engine heats up too fast

I don't think you have a problem.
Factory gauges are notoriously inaccurate. A lack of calibration on the gauge only makes it worse. One third of the way on one gauge bares no relevance to the same position on another gauge.

Furthermore, the Chrysler engine is acutally a more advanced design than the Impala engine. Engeneers design these engines to warm up as fast as possible mainly to reduce emissions. The newer engine designs do this better.

Your partly-aluminum engine will warm up faster then the all-cast iron GM engines anyways.

If you are worried about the cooling system just do some maitenance. Change the thermostat and give it a flush and fill. If the radiator looks like its getting clogged inside, or is old and deteriorated, then replace it. Also replacing the rad and heater hoses is a good idea, especially if they are old.
Reply With Quote
  #3  
Old 03-20-2005, 01:07 PM
Andydg Andydg is offline
AF Enthusiast
 
Join Date: May 2004
Posts: 2,673
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Engine heats up too fast

As long as it's not over heating it shouldn't be a problem I don't think.
Reply With Quote
  #4  
Old 03-20-2005, 09:01 PM
curtis73's Avatar
curtis73 curtis73 is offline
Professional Ninja Killer
 
Join Date: Nov 2002
Posts: 3,561
Thanks: 0
Thanked 10 Times in 10 Posts
Re: Engine heats up too fast

I wish mine heated up that fast; lower emissions, less fuel used, and the heater works faster

Nothing wrong with it as long as it doesn't over heat.
__________________
Dragging people kicking and screaming into the enlightenment.
Reply With Quote
  #5  
Old 03-21-2005, 10:46 PM
INF3RN0666 INF3RN0666 is offline
AF Regular
Thread starter
 
Join Date: Jul 2003
Posts: 324
Thanks: 0
Thanked 0 Times in 0 Posts
just wanted to say, thx for your help, it's greatly appreciated. Well I'll keep an eye on it this summer.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Engineering/ Technical


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:08 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts