|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#16
04-18-2004, 06:12 PM
|
||||
|
||||
|
Re: Lights and locks
Ok, I have a question. This would require a 3 prong switch? I've sat down before and tried to draw out how to do what your talking about, but can't quite get it. I would LOVE this feature so any input will greeeatly help me.
__________________
1998 ECSB Z71
Whelen LED's Kenwood 2-way "BIG 3" 2500+ watt audio  
|
|
#17
04-18-2004, 09:27 PM
|
|||
|
|||
|
Re: Lights and locks
you will need a dpdt throw switch ( 6 poles) the wiring would work like this.
1 2 3 4 5 6 bridge 1 and 4 with resistor; connect bcm to 2 and 5; connect sensor to 3/6 use same wire orientation for this as 2/5 from bcm. this should allow the switch to connect 2/5 and 1/4 in one position thus disabling the auto feature or connect 2/5 to 3/6 in the other position allowing sensor to control head lights. Make sure you get solid connections to the switch and insulate them to prevent accidental shorts. Mounting options would only be limited by wire length.
|
|
#18
04-19-2004, 06:57 AM
|
||||
|
||||
|
Re: Lights and locks
Man, you have no idea how much that helped me. It's not that hard, I guess I just wasn't thinking about it. I had a relay and all kinds of mess figured into it.
__________________
1998 ECSB Z71
Whelen LED's Kenwood 2-way "BIG 3" 2500+ watt audio
|
|
#19
04-19-2004, 11:19 AM
|
|||
|
|||
|
Re: Lights and locks
glad I could help. Let me know how it works.
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
